Free forklift safety program template
Free forklift safety program template (PDF-ready). Operator licensing, pre-start checks, pedestrian separation, refuelling, load handling and training.
Updated 2 Oct 2026
Forklift Safety Program
Operator licensing, pre-start checks, traffic management, refuelling, load handling and training
4. Pre-start inspection and defects
5. Traffic management and pedestrians
6. Load handling
7. Refuelling and charging
8. Maintenance and servicing
9. Training, supervision and review
Prepared by
Signature
Print name
Position
Date
Approved by (management)
Signature
Print name
Review due
Date
How to use: download the PDF, print or complete digitally on any device.
- PDF format, ready to print or fill on screen
- Use as-is or customise to suit your operation
- Go digital in MapTrack for photos, reminders and audit trails
Two ways to use it
Use in MapTrack →Use it digitally instead
Unlimited usersUpload this PDF and MapTrack drafts the form for you.
- Scan the asset’s QR tag with any phone
- Submitted forms can trigger alerts
- Photos on fails, audit-ready records
- Export responses, PDF reports with your logo
Free trial. No credit card needed.
Trusted by teams across Australia and New Zealand
We respect your privacy. Unsubscribe anytime.
These templates are free general guides provided as-is. They do not constitute legal, safety or compliance advice. You are responsible for ensuring any form meets your specific workplace obligations, industry standards and applicable regulations.
Don't just download it - use it live. Start a free workspace, upload this forklift safety program template and MapTrack drafts it as a form your crew can run from a phone.
Co-Founder & Commercial Director
Key takeaways
- The MapTrack forklift safety program template contains 16 checks across 6 sections. Sections covered: 4. Pre-start inspection and defects, 5. Traffic management and pedestrians, 6. Load handling, 7. Refuelling and charging, 8. Maintenance and servicing, 9. Training, supervision and review.
- Forklifts are powered mobile plant covered by powered mobile plant duties in the WHS Regulation 2025 (NSW).
- Operators must hold the relevant High Risk Work Licence, typically class LF, plus site verification of competency.
- Pedestrian separation and traffic management are the controls that prevent the most serious forklift injuries.
- A pre-start inspection is one control inside the program, completed before use every shift.
- Review the program annually and after any incident, new truck or layout change.
Enter your email below to download this forklift safety program template as a ready-to-use PDF.
Used by construction, mining and field service teams
What is a forklift safety program template?
A forklift safety program template is a single document that sets out how an organisation controls the risks of operating forklifts and other powered industrial trucks across a site. It captures the scope and the plant covered, the operator licensing and verification of competency requirements, the daily pre-start inspection routine, the traffic management and pedestrian separation rules, the refuelling and battery charging controls, the safe load handling limits, the maintenance and fault reporting process, and the training, supervision and review arrangements that keep the program current. Written as a controlled document rather than a checklist, it gives supervisors, operators and visitors one reference for how forklifts are run safely.
Forklifts are powered mobile plant and are one of the most common causes of serious workplace injury in Australian warehouses, yards and depots, so the controls around them are a direct duty under work health and safety law. A documented program turns scattered rules into an auditable system: it shows what hazards were identified, what controls were chosen, who is authorised to operate, and how the controls are checked and maintained over time. Aligning the program with the powered mobile plant duties in the Work Health and Safety Regulation 2025 (NSW) and the operation guidance in AS 2359 gives a person conducting a business or undertaking clear evidence that forklift risks are being managed, not just hoped away.
Learn more about compliance and inspections in MapTrack.
Benefits of using this forklift safety program template
- Fewer pedestrian incidents: documented separation rules and exclusion zones keep people and forklifts apart, which is where the most serious injuries happen.
- Verified operators only: a licence and competency register stops unlicensed or unfamiliar people operating plant they are not authorised to run.
- Consistent pre-start discipline: a defined daily inspection routine catches brake, mast, tyre and hydraulic faults before the forklift carries a load.
- Auditable compliance: a controlled program with named controls is strong objective evidence of meeting powered mobile plant duties during a regulator visit.
- Less unplanned downtime: a clear fault reporting and maintenance link gets defects fixed early instead of running plant to failure mid shift.
- Safer refuelling and charging: written controls for LPG, diesel and battery charging reduce fire, fume and manual handling risks in the refuelling area.
- Faster inductions: one reference document gets new operators, contractors and labour hire up to the site standard without relying on word of mouth.
Benefits of digitising forms in MapTrack
When you move your plans from paper to MapTrack, you get:
- Field users can easily scan a QR code to complete a form on mobile. Unlimited users.
- Email the right people when a form is submitted, with an automation you set up.
- File every completed form against the asset, location or person it covers.
- Download any completed form as a PDF, with failed answers listed at the top.
- Fill in forms offline; they upload when the device is back online.
- Build conditional logic (show or hide questions based on answers).
- Take pictures or attach photos. Not possible with a paper-based form.
- Electronic signatures.
- Edit forms later without reprinting.
- Set who can view, fill in or edit forms with user roles.
- Upload a paper form (PDF, Word, Excel or a photo) and MapTrack's AI builds a digital version for you to check.
- Email safety managers when a hazard report is submitted, with an automation you set up.
- Keep every hazard and incident report against the site it came from, with photos.
- Turn a hazard report into a corrective-action work order with its own review step.
Book a demo to see how MapTrack handles plans.
Try MapTrack free for 30 days
Full access to every feature. No credit card required. Per-asset pricing so you scale as your fleet grows.
- No credit card required
- 30 days free trial
- Cancel anytime
1-2 days/week saved
“Bloody amazing! We used to spend 1-2 days a week tracking and managing our generators alone.”
Steve McAllister
Asset Coordinator, Saunders International
What to include in a forklift safety program template
This forklift safety program template covers 9 key areas:
- Program scope: the sites, areas and types of forklift or powered industrial truck covered
- Roles and responsibilities: PCBU, supervisors, operators, pedestrians and visitors
- Operator licensing: High Risk Work Licence class held, plus site verification of competency
- Pre-start inspection: the daily check routine, defect tagging and out of service process
- Traffic management: designated routes, speed limits, pedestrian separation and exclusion zones
- Load handling: rated capacity, load chart use, stacking limits and travel with the load lowered
- Refuelling and charging: LPG, diesel and battery charging controls, signage and isolation
- Maintenance and fault reporting: scheduled servicing, the fault reporting path and records kept
- Training, supervision and review: induction, refresher training, supervision and review triggers
How to use this forklift safety program template
- Define scope and assess the hazards: List every forklift and powered industrial truck on site and the areas they work in, then run a risk assessment with operators and supervisors. Identify the pedestrian, load, refuelling and traffic hazards specific to your layout rather than copying a generic list.
- Set licensing and competency controls: Record the High Risk Work Licence class required for each truck and add a site verification of competency step. Keep a register of authorised operators so anyone supervising can confirm at a glance who is cleared to run which plant.
- Establish daily pre-start and defect handling: Define the pre-start inspection routine, where the records are kept, and exactly what happens when a check fails. Make the out of service tag and fault reporting path unambiguous so a defective forklift is parked and reported, not quietly kept running.
- Document traffic, load and refuelling controls: Map the designated routes, speed limits, pedestrian separation and exclusion zones, then set the load handling and refuelling rules. Pair the written controls with line marking, signage and barriers on the floor so the document matches what people actually see.
- Train, supervise and review the program: Induct operators and pedestrians into the program, schedule refresher training, and define how supervision confirms the controls are followed. Set review triggers such as an incident, a new forklift or a layout change so the program stays current instead of going stale.
In MapTrack, you can digitise safety inspections and compliance forms. Each submission is stored as a timestamped PDF against the asset record.
Get the free templateEnter your email above to download the full forklift safety program template as a PDF.Back to download formHow often should you complete this plan?
Treat the program as a living document, not a one off. Operators complete a pre-start inspection at the start of every shift or before first use, and forklifts follow a scheduled servicing interval set by the manufacturer and hours of use. Authorised operator records and licence expiry dates are checked on a rolling basis so no one operates on a lapsed licence.
Review the full program at least annually, and sooner if there is an incident or near miss, a new type of forklift is introduced, the site layout or traffic flow changes, or the relevant standard or regulation is updated. A short documented review that confirms the controls still match the site is far more useful than a thick program that no one has opened since it was written.
Frequently asked questions
Applicable regulatory standards
This template is a starting point. Check the current requirements that apply to your equipment, work and location. The template alone does not establish compliance.
- Work Health and Safety Act 2011, primary duty of care (s19)
- Work Health and Safety Regulation 2025 (NSW), powered mobile plant control of risk (s214, s215)
- Work Health and Safety Regulation 2025 (NSW), maintenance and inspection of plant (s213)
- High Risk Work Licence (HRWL) class LF for forklift operation
- AS 2359 Powered industrial trucks (selection, operation and maintenance)
- ISO 45001:2018 Occupational health and safety management systems
Forklift safety program template preview
The numbers behind this forklift safety program template
Every figure below is sourced and dated, so you can quote it in a toolbox talk, a budget case or a board paper without having to chase the original report.
Embed this free template on your website
Run an industry blog, trade association site, or training resource? Drop a preview of this free forklift safety program template straight into your page. The snippet is self-contained, needs no scripts, and links readers back to the full free template.
<div style="max-width:480px;font-family:system-ui,-apple-system,'Segoe UI',Roboto,sans-serif;border:1px solid #E5E7EB;border-radius:12px;padding:20px;background:#ffffff;">
<p style="font-size:12px;font-weight:700;letter-spacing:0.05em;text-transform:uppercase;color:#071D49;margin:0;">Free template</p>
<p style="font-size:18px;font-weight:700;color:#071D49;margin:6px 0 0;">Forklift safety program template</p>
<ul style="margin:12px 0 0;padding-left:18px;color:#374151;font-size:14px;line-height:1.6;">
<li style="margin:4px 0;">Program scope: the sites, areas and types of forklift or powered industrial truck covered</li>
<li style="margin:4px 0;">Roles and responsibilities: PCBU, supervisors, operators, pedestrians and visitors</li>
<li style="margin:4px 0;">Operator licensing: High Risk Work Licence class held, plus site verification of competency</li>
<li style="margin:4px 0;">Pre-start inspection: the daily check routine, defect tagging and out of service process</li>
<li style="margin:4px 0;">Traffic management: designated routes, speed limits, pedestrian separation and exclusion zones</li>
<li style="margin:4px 0;">Load handling: rated capacity, load chart use, stacking limits and travel with the load lowered</li>
</ul>
<p style="font-size:13px;color:#6B7280;margin:14px 0 0;padding-top:12px;border-top:1px solid #E5E7EB;">Free <a href="https://www.maptrack.com/templates/forklift-safety-program-template" style="color:#071D49;font-weight:600;text-decoration:none;">Forklift safety program template</a> by MapTrack</p>
</div>Free to reuse, including commercially. This template is published under a Creative Commons Attribution 4.0 licence. Copy it, adapt it, put it on your own site or in your own docs. All we ask is that you credit MapTrack with a link back to this page. The snippet above already includes that credit, so if you use it as-is you’re covered.
Cite this template
Writing about this topic? You’re welcome to quote this checklist. Here’s the wording to use so your readers can find the original.
The MapTrack forklift safety program template contains 16 checks across 6 sections.
- Short attribution
- MapTrack Forklift safety program template, https://www.maptrack.com/templates/forklift-safety-program-template
- Reference list
- MapTrack. (2026). Forklift safety program template [Checklist template]. Retrieved from https://www.maptrack.com/templates/forklift-safety-program-template
Free to reuse with credit under a Creative Commons Attribution 4.0 licence. If you’d rather link straight to it, the page is https://www.maptrack.com/templates/forklift-safety-program-template.
Need to digitise safety inspections and compliance forms?
Register every asset in MapTrack, attach digital forms, and get a complete history of every inspection, service and compliance record.
Compliance and inspections · All templates · Pricing · Book a demo