Skip to main content

Heavy Equipment GPS

Heavy equipment GPS tracking for skid steers, loaders, rollers and graders

Plant and fleet on one register: where each machine is, how many hours it's done, when it's due for a service and whether the pre start got done. Keep heavy equipment, attachments, inspections and service records together, then confirm the intended GPS or telematics delivery separately.

600,000+assets tracked since 2012
150+telematics, fleet and fuel-card data sources
24/7support
Two motor graders parked on a red dirt outback track under a blue sky, with a MapTrack Service Board row laid beside them showing one grader at 8,874 hours.
Hour meter reading
MapTrack Service Board row: a motor grader at 8,874 hours, read 32 minutes before the capture.
GPS trackerExample: MapTrack Telematics
Pre start doneExample: today, GR-01
Hour meter reading
MapTrack Service Board row: a motor grader at 8,874 hours, read 32 minutes before the capture.
GPS trackerExample: MapTrack Telematics
Pre start doneExample: today, GR-01
Hour meter reading
MapTrack Service Board row: a motor grader at 8,874 hours, read 32 minutes before the capture.
Pre start doneExample: today, GR-01
GPS trackerExample: MapTrack Telematics

How MapTrack runs earthmoving plant

The tracker or tag for each machine, hours on its hours meter, the pre start on a phone, and the servicing, check-outs, files and costs on the same record.

The short answer

MapTrack keeps every skid steer, loader, backhoe, roller, dozer and grader on its own record with a QR label. A hardwired tracker estimates run hours, the operator records the hour meter on the pre start, and those hours drive each machine's service plan. The app shows the latest position; live tracking runs in MapTrack Telematics.

Lachlan McRitchie

Lachlan McRitchie

Co-Founder & GM of Operations

Published 9 July 2026Updated 26 October 2026

Key takeaways

  • One record per skid steer, loader, backhoe, roller, dozer or grader: make, model, serial, fleet number, QR tag and status, with assignments, maintenance, requests, forms and files a tab away.
  • The hour meter reading on the pre start updates the machine's hours meter, and a registered tracker keeps it current with estimated run hours, so services fall due on use.
  • One service plan holds each machine's hour services from its maker's manual, and on an automatic schedule an hour reading someone records raises the work order for you.
  • Live GPS, trips, history and boundary alerts run in MapTrack Telematics; the app shows each machine's latest position and your site and yard boundaries.
  • Cat, Komatsu, JCB and Volvo CE machines' own telematics can feed engine hours, location, fault codes and fuel used into MapTrack, set up by our team under Connections.

Trusted by construction, mining and field service teams

RIXMineral ResourcesHacer GroupSaunders InternationalSupagasMetro Tunnel
G2 rating 4.9 out of 5
Capterra rating 5.0 out of 5GetApp rating 5.0 out of 5Software Advice rating 5.0 out of 5
16 reviews on G2 · the same 17 reviews on Capterra, GetApp and Software AdviceCapterra Best Value 2026 badgeCapterra Best Ease of Use 2026 badgeAll MapTrack reviews

Customer proof

What plant customers say

“Finally we've got everything in one place - I would recommend this platform to anyone.”

Ashley Sutherland, Plant & Logistics Administrator, RIX Specialist ContractingReview on G2
  • From the published story: Safety audit documentation that previously took 2–3 days to compile can now be retrieved instantly from the platform on any device.
Read the RIX Specialist Contracting story

“MapTrack streamlines tracking and asset servicing across mine shutdowns - simple, reliable, and effective.”

Gordon Stennings, Maintenance Storeman, Mineral Resources
  • From the published story: The end-of-shutdown reconciliation - previously a multi-day exercise - is now completed in hours.
Read the Mineral Resources story

“Thanks to MapTrack we know exactly where our gear is, who has it and when it needs servicing.”

Denis Slaviero, HSEQ Manager, Hacer GroupReview on Capterra
Read the Hacer Group story

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

Which tracker suits each machine

Most GPS trackers do not solve the full heavy equipment workflow. Location is useful, but heavy equipment operators also need asset, inspection and service records. In MapTrack every tracker, tag and label lands on the machine's own record. Most fleets mix a few: a hardwired tracker on machines with a usable 12 or 24 V supply, a battery one on small plant and compactors, Bluetooth tags on attachments, a QR label on every machine, and the maker's own telematics, set up by our team.

  • G70 hardwired tracker: a black sealed box with a power cable and mounting lugs

    Skid steers, loaders, backhoes, dozers and graders with a usable 12 or 24 V supply

    Hardwired GPS tracker (G70)

    • Location on the machine's record
    • Estimated run hours that follow the ignition, into its hours meter
    • Picks up Bluetooth tags on its attachments
    • Battery, signal and last report in MapTrack

    Good to know: Wired into the machine's power and ignition: 8 to 33 V, so 12 V and 24 V systems

  • Dart3 hardwired tracker: a compact black unit

    The same machines, when you want a second hardwired option beside the G70

    Hardwired tracker (Dart3)

    • Location on the machine's record
    • Estimated run hours that follow the ignition, into its hours meter
    • Picks up Bluetooth tags on its attachments

    Good to know: Wired into the machine's power and ignition: 8 to 32 V

  • Barra GPS LTE-M/NB-IoT tracker, side profile of compact enclosure

    Small plant and compactors, and machines without a usable power supply

    Battery GPS tracker (Barra GPS)

    • No wiring
    • The machine's own location on its record
    • Tracker battery level in MapTrack
    • Estimated run hours into its hours meter

    Good to know: Its hours are estimates, so record the hour meter reading at each service

  • Blue PUCK ID Bluetooth tag: a small, round, grey tag with the Bluetooth mark

    Buckets, forks, hammers, augers and sweepers

    Bluetooth tag

    • Each attachment's location in MapTrack, updated when a gateway tracker (Oyster, Remora3, G70 or Dart3) picks it up

    Good to know: No location of its own: it needs a gateway tracker in range

  • Medium custom QR asset label with logo and phone details

    Every machine, for the pre start, audits and the record

    QR labels

    • Scan QR, barcode and Data Matrix labels with the phone camera or a handheld Bluetooth or USB scanner to open the record or start the pre start
    • Bulk QR label printing in MapTrack
    • Yard and depot audits by scan

    Good to know: A plain scan records no location

  • Cat, Komatsu, JCB and Volvo CE machines with their maker's telematics

    The machine's own telematics

    • Cat, Komatsu, JCB and Volvo CE machines' own telematics can feed engine hours, location, fault codes and fuel used into MapTrack, set up by our team under Connections
    • You send us the API or data feed details, and our team sets it up and checks it's working

    Good to know: Set up with our help rather than by you

Our trackers ship within Australia and New Zealand; elsewhere we connect your existing trackers with you.

What it costs

MapTrack is priced per asset, and the plans are on the pricing page. Trackers, QR labels, install and freight are quoted with your order, after a short setup call so each asset gets the right tracker.

Assets covered by heavy equipment GPS tracking

MapTrack lets heavy equipment operators keep mixed assets in one register and use QR labels for identification. Skid steers and posi-tracks, wheel and track loaders, backhoes, rollers and compactors, dozers and graders each get the tracker or tag that suits them, and the rest of the heavy fleet sits on the same kind of record.

  • Skid steers and posi-tracks

    Skid-steer loaders and compact track loaders, whatever the make

    • The Loader Daily Prestart, hour meter reading included
    • Forks, buckets, sweepers and augers as accessories, confirmed out and back on a check-out
    • A hardwired tracker where the machine has a usable power supply
  • Wheel and track loaders

    On the loader pre start and a tiered hour plan

    • The Loader Daily Prestart (Wheel / Skid Steer)
    • 250, 500 and 1,000 hour services on one plan, the bigger covering the smaller
    • The bucket and forks as accessories of the machine
  • Backhoes

    Two ends, each with its own attachments

    • Front and rear attachments as accessories or sub-assets
    • JCB's stated 500-hour service interval on a 3CX Compact, or your maker's interval
    • The load chart on the machine's record where it lifts
  • Rollers and compactors

    Smooth drum and padfoot rollers, plate compactors and rammers, often hired in

    • The Plant Daily Prestart (General Machine), hour meter reading included
    • Small plant on a Barra GPS battery tracker or a Bluetooth tag
    • The supplier's paperwork in its files when it's hired in
  • Dozers

    Hours, a yearly inspection and the files

    • Hour services from the maker's manual
    • A yearly inspection on a calendar schedule, due soon and overdue, with an email 7 days out
    • The operator manual, service reports and the plant risk assessment in its files
  • Graders

    Hours, status and the Service Board

    • Hour services on one service plan
    • Repair status while it is in for work, seen by the next person who scans it
    • Overdue services first on the Service Board
  • The rest of the heavy fleet

    In the same mixed-asset register

    • Excavators, dozers, graders and loaders
    • Cranes, telehandlers and forklifts
    • Haul trucks, service trucks and water carts
    • Mining, civil and infrastructure plant
    • Attachments, buckets and hydraulic tools
    • Remote, satellite-tracked or low-coverage assets

Excavators, cranes, trucks and trailers have their own pages

Excavators sit in the same register as the machines on this page, and they have a page of their own: which tracker suits each size of machine, the excavator pre start and its hour services. Cranes, telehandlers and forklifts, the trucks that work beside the plant and the trailers and floats that move it are each covered on their own page too.

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

One skid steer, tagged three ways

A hardwired tracker on the skid steer picks up the Bluetooth tags on its pallet forks and sweeper, and a QR label in the cab opens the machine's record for the pre start: each lands on the right record.

  1. Tracker on the skid steer

    Its location and estimated run hours

  2. Bluetooth tags on the attachments

    Updated when the tracker picks them up

  3. QR label in the cab

    Scan to open the record or start the pre start

Example record

  • Bobcat T595 Track Loader, fleet number SS-01
  • Pallet forks and a sweeper attachment as its accessories
  • Plant Service Plan, every 250 hours on this schedule
Example values from a demonstration workspace, not customer data.
MapTrack asset record for Bobcat T595 Track Loader: QR code, category Heavy Plant then Skid Steer Loaders, tag DC-00006 and Available status; a Details card with make Bobcat, model T595, year 2022, serial B3NF11147, fleet number SS-01, ownership Owned, last service date 26 Aug 2026, purchase date and price, and a Plant Service Report file under servicing docs; its Plant Service Plan On Track for 12 Nov 2026; and a photo of the track loader.

One skid steer’s record

Track loader SS-01’s record: its QR tag, serial and fleet number, its last service and service report, and its Plant Service Plan.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport on the loader’s Overview tab, cropped right of the navigation sidebar. Its meter readings and accessories continue further down the page; the service report is an example document.

Maintenance does not follow actual usage

Hours from the pre start, a tracker or the maker's telematics

Every route lands on the machine's hours meter in MapTrack, so its services fall due on use. The operator records the hour meter on the pre start, someone records it on the machine's record, a tracker registered in MapTrack keeps it current with estimated run hours, or Cat, Komatsu, JCB and Volvo CE machines' own telematics feed engine hours in, set up by our team.

  • Enter hour or odometer readings manually for meter-based service planning
  • Record the hour meter on the machine's pre start and its hours meter updates
  • Register each machine's tracker in MapTrack and see its battery level, signal and last report
  • Other tracker brands are connected with our help
  • MapTrack works out each machine's usage rate from its recent readings and estimates when its next service falls due
  • Readings that are out of date are flagged, so a meter that stops updating gets noticed

Setup and limits

  • Tracker hours are estimates, so record the hour meter reading at each service.
  • A failed inspection does not create follow-up work unless a workspace owner configures and tests the form-submission automation.
  • Provider fit: confirm telematics delivery.

Loader hours raise its service

A wheel loader's runtime hours, its open work orders and its 250 hour service.

MapTrack app · Demonstration data · Recorded

A skid steer’s Plant Service Plan in MapTrack: a notice that the last reading was 34 days ago, usually read every 7 days, 1,986 hours on Sep 21, 2026, probably near 2,159 hours at about 3 hours a day, with Record reading; a current runtime hours reading of 1,986 hours, 173 hours left at last reading, against a service due at 2,159 hours, estimated due Nov 12, 2026; and last service Aug 28, 2026.

A skid steer’s hours, flagged when a reading goes stale

The track loader’s last hour reading is 34 days old, so the plan flags it and estimates where the hours are now, against the service due at 2,159 hours.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport on Bobcat T595 SS-01’s Maintenance tab, cropped to its Plant Service Plan. The 250 hour interval is the demonstration workspace’s own plan, not a maker’s.

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

Service control

Configure meter-based maintenance safely

Choose and test the schedule trigger and manual, per-asset automatic or batch generation mode. One service plan holds a machine's hour services, 250, 500 and 1,000 hours for example, and when two coincide the bigger one covers the smaller in one work order. Set them by hours, months or whichever comes first, from the maker's manual: Dynapac lists service kits at 50, 250, 500 and 1,000 hours for its CA250D soil compactor.

  • PM: configured time or meter triggers
  • Configured hour, odometer or calendar service triggers
  • Selected inspection results can feed a tested automation
  • Service history and costs stored against each asset
  • Configured maintenance email to selected Person records
  • Manual meter readings available without a sensor feed
  • On an automatic schedule, an hour reading someone records raises the work order for you, one per machine or one batch for everything due together
  • A person raises per-asset or batch work orders from the schedule in a couple of clicks, and one work order can cover several machines, each with its own pass or fail
  • A calendar schedule, such as a yearly inspection or a client's check, puts the job due soon and overdue, and the person assigned to it gets an email 7 days before it falls due
  • Scan a batch of machines and log the service for all of them at once; each keeps its own hour reading and history entry
  • The Service Board shows what's overdue and due soon, and each machine and schedule gets a 0 to 100 maintenance health score with 12 months of memory

Setup and limits

  • Logging a batch service by scan needs a connection.
  • Start with the assets where confirmed location or maintenance evidence matters most, test one provider and field workflow, then expand.
250 hoursEngine oil and filter, fuel filter and drive belts (Bobcat S590 skid-steer loader: every 250 hours or 12 months)SourceBobcat S590 skid-steer loader service schedule (Operation & Maintenance Manual)
500 hoursJCB's stated service interval for the 3CX Compact backhoe loader, with simple, ground-level daily checks betweenSourceJCB 3CX Compact backhoe loader (JCB, US)
1,000 hoursHydraulic filter and fluid, chaincase fluid and valve clearance (Bobcat S590: every 1,000 hours or 12 months)SourceBobcat S590 skid-steer loader service schedule (Operation & Maintenance Manual)
1,000 hoursEngine oil up to 1,000 hours or 12 months with Volvo's own oil and high-performance filters (Volvo CE wheel loaders)SourceVolvo Construction Equipment extends oil change intervals to 1000 hours (Volvo CE, 2021)

These are examples from the makers' own documents. Your machine's operation and maintenance manual sets its intervals; MapTrack holds the schedule you set from it. Makers differ: JCB's 3CX and 4CX Quick Reference Guide lists daily (10-hour) and weekly (50-hour) checks, Komatsu extends engine oil up to 1,000 hours on its Care Plus II Premium models with its own oil, and Bobcat's S590 schedule moves the engine oil and filter to every 100 hours under severe conditions. Some makers set a calendar limit beside the hours.

The loader pre start on a phone

Operators scan the machine's QR label and do the pre start on a phone, or a shared tablet with their own PIN. MapTrack's civil setup includes a Loader Daily Prestart (Wheel / Skid Steer): the runtime hours reading, fit for work, whether they hold the required licence or VOC, then the cabin, seatbelt, horn and reverse alarm, lights, mirrors, steering and brakes, controls, fluids and leaks, tyres or tracks, bucket or forks and attachments, the quick hitch and the fire extinguisher, signed at the end. Graders, rollers and dozers without a form of their own can use the Plant Daily Prestart (General Machine), "for any machine without a dedicated checklist".

  • Fault Present opens a required fault note and photo
  • A rule you set up can raise a linked corrective task, recorded apart from the original fault
  • The completed pre start downloads as a PDF
  • An operator's tickets, training records and their expiry on their person record, with a VOC form signed off there

Setup and limits

  • Forms submit offline and sync later; opening one by scanning needs coverage or the form already loaded on the phone.
  • A failed submission doesn’t create follow-up work by default. Configure and test any task or work-order automation before rollout.
  • MapTrack doesn't check an operator against a machine.
MapTrack Loader Daily Prestart (Wheel / Skid Steer) on a phone, 23 of 25 answered: Fault Present selected for bucket / forks and attachments, with the required Describe fault box holding a note on wear at the left corner, reported to the workshop, the required Photo of fault field, and the Submit button.

Fault Present on a loader pre start

Choosing Fault Present on the bucket and attachments check opens a fault note and a photo, both required before the pre start can be submitted.

MapTrack app · Demonstration data · Captured

About this screenshot

Captured at a 430 x 932 phone viewport in a demonstration workspace, on a CAT 938H wheel loader. The pre start was filled in for this screen and not submitted.

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

Location evidence

Review confirmed positions for heavy equipment

Location lives outside the asset record. Teams may see where heavy equipment are in one system while inspection, service, document and cost records live elsewhere. MapTrack keeps those operational records together and can show the latest GPS fix when a device feed is configured. Use MapTrack to see the latest linked GPS position, then open the asset record for inspections, maintenance and documents. Without confirmed movement evidence, heavy equipment operators may rely on calls, dockets and spreadsheets.

  • Latest linked GPS position for heavy equipment
  • Separately scoped MapTrack Telematics for geofences and trip history
  • QR identification for assets without a linked GPS device
  • Asset, inspection, service and document records kept together
  • GPS + QR: confirmed location and identification
  • The app shows a machine's latest position when its tracker has a fix; without one, the pin shows where it was last checked out or returned
  • Draw each site's or yard's boundary on its map in MapTrack and see the gear there
  • Live GPS, trips, history and alerts when a machine enters or leaves a boundary run in MapTrack Telematics

Setup and limits

  • The current app can show the latest GPS fix when a device feed is configured; MapTrack Telematics is separate.
  • Provider and delivered fields confirmed before rollout.
  • Confirm the device, provider, delivered location or telemetry fields and rollout scope.
  • Confirm the intended location source and any reporting or integration scope before rollout.
  • Keep asset, inspection and service records in MapTrack, then confirm the provider, fields and delivery needed for the location layer.
  • Asset, maintenance and review workflows to test alongside the intended location delivery.

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

Check-outs, bookings and yard audits

Check a machine out to a person, a site or both, with a due-back date, or book it for a job with Requests, approve it and turn it into a check-out by scan. Its attachments are confirmed out and back, with a reason for anything missing.

  • Set a machine's status to Repair or Damaged on its record, and the next person who scans it sees that status
  • A Damaged or written-off machine is blocked at check-out, and an owner's override is logged
  • An overdue service is flagged when someone checks the machine out or books it, and going ahead is logged
  • Overdue check-outs get a reminder email
  • Yard and depot audits by scan: at the end you choose Mark Missing or Skip All

Setup and limits

  • A scan identifies the asset. Assignment, return, transfer and audit actions are deliberate connected steps.
  • Check-outs, returns, audits and Requests need a connection.
  • A status is a record, so tag the machine out physically too.
MapTrack New Assignment form with an amber notice that some selected assets may be unavailable, and its detail open: the CAT 140 Motor Grader with Plant Service Plan maintenance overdue since 12 September 2026 and a Plant Service Plan task on 26 September 2026, and the Robotic Total Station with a task to send it for annual calibration on 17 October 2026, each with a link.

Read the warnings before issuing equipment

Overdue maintenance and scheduled tasks show as amber warnings. No due-back date is set here, so every upcoming conflict is listed. With a due-back date, only tasks before it are listed: a 15 October due-back leaves out the total station’s 17 October calibration.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace. Two assets selected and Assign opened; the form was not saved.

MapTrack Return Assets on a phone for Bobcat T595 Track Loader with 2 accessories: Pallet forks and Sweeper attachment, both marked Returned, 2 of 2 confirmed, and the Return assets button.

A skid steer’s attachments confirmed back

At return the track loader’s pallet forks and sweeper attachment are each confirmed back.

MapTrack app · Demonstration data · Captured

About this screenshot

Captured at a 430 x 932 phone viewport in a demonstration workspace, during the loader’s return to the workshop.

The Assignments tab of a skid steer’s record in MapTrack: two assignments created 26 Oct 2026 to Jamie Webb, both Complete, each due back 6 Nov 2026 at 4:00 PM.

A skid steer’s check-outs on its record

Each check-out of the track loader stays on its record, with who had it, when it was due back and that it came back.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport on Bobcat T595 SS-01’s Assignments tab.

Plan heavy equipment GPS tracking around the operational record

Keep confirmed location, pre-start and maintenance records together, with provider and reporting scope verified before rollout.

  • Free trial
  • No credit card required
  • Confirm current plan scope

Built for field operations

Heavy Equipment GPS Tracking without another disconnected portal

MapTrack keeps asset, inspection and service records together. Operations and maintenance teams can work from the same asset record. Each machine's papers sit on it too.

  • GPS: Latest linked position
  • QR: Scan-based identification
  • CMMS: Work orders and service history
  • The operator manual, the load chart and service reports
  • The plant risk assessment and SWMS
  • Insurance and registration papers, and in Great Britain any thorough examination report

Setup and limits

  • Use QR for identification and confirm any GPS, OEM or BLE deployment separately.
  • Confirm any geofence, utilisation, finance or integration workflow before rollout.
  • Provider fit: Confirm delivered fields.

Costing needs location evidence

Costs, parts and fuel

Every service keeps its labour, parts and external costs in the machine's history. The plant dealer or mechanic sits on a schedule as its preferred vendor, and filters, teeth and cutting edges are parts with stock per bin, planned against used on the work order.

  • Assignment, service and entered cost records can support a project review
  • Fuel used comes through MapTrack Telematics, or through the machine's own telematics set up by our team
  • Rate cards, an add-on on Pro and Enterprise plans: daily, weekly and monthly hire rates (dry, wet or standby), with the hire cost recorded on return
  • Finance and costings, an add-on on Pro and Enterprise plans: a cost ledger for every machine, with budget against actual, depreciation, repair-or-replace guidance and fuel costs
  • Asset Performance shows each machine's utilisation: its recorded use over a period, from check-outs and requests, never from GPS

Setup and limits

  • Confirm any required geofence, time-on-site, utilisation or cost-allocation report before rollout.
  • A work order records the parts planned and used; it doesn't deduct stock.
Asset Performance set to Day from 25 September to 7 October 2026, with utilisation and requested-ahead summaries, a category breakdown and Small Plant and Tools asset rows.

Compare recorded equipment use over a chosen period

Set the date range before comparing the summary and category breakdown. Recorded allocations drive utilisation; future requests appear separately. The selected group contains nine assets in this example.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration assignments and requests, viewed on 30 September. These percentages describe recorded allocations, not measured engine hours or productive work.

The rules earthmoving plant sits under

In Australia, regulation 213 of the WHS Regulations has the person with management or control of plant get it maintained, inspected and, if necessary, tested by a competent person, following the manufacturer's recommendations (Victoria has its own OHS rules), and SafeWork NSW's earthmoving checklist asks for maintenance inspections recorded as the maker specifies, a completed pre start and a load chart where the plant lifts. In Great Britain, PUWER asks for work equipment kept in good repair with any maintenance log up to date, and if you lift with a loader or backhoe, ask your examiner whether LOLER applies to it. In the US, 29 CFR 1926.602 covers the safety equipment on earthmoving machines, and 1926.20 asks for frequent and regular inspections by competent persons.

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

How it works

  1. 1. Segment the asset fleet

    List the heavy equipment that need confirmed GPS positions and the attachments or tools that suit QR identification. Treat OEM and BLE delivery as separate scope.

  2. 2. Choose tracker classes

    Use QR labels for identification, then confirm any hardwired GPS, OEM, BLE, satellite or battery provider, hardware, fields and delivery before rollout.

  3. 3. Verify location delivery

    Test the device, provider, position fields and update behaviour. Confirm the device, provider, delivered location or telemetry fields and rollout scope.

  4. 4. Configure maintenance and review needs

    Choose and test the schedule trigger and manual, per-asset automatic or batch generation mode.

Want to see it on your own plant?

Book a demo

30 minutes on Microsoft Teams

Common questions

What is heavy equipment GPS tracking?

Heavy equipment GPS tracking uses location data to help teams find heavy equipment. The current MapTrack app can show the latest GPS fix for an asset when a device feed is configured. MapTrack Telematics is separately scoped and can provide live GPS, geofences, trip history, odometer and run hours. Confirm any GPS, OEM, BLE or satellite provider, hardware, fields, delivery into the current app and commercial scope before rollout.

Which heavy equipment can MapTrack track?

MapTrack can keep excavators, dozers, loaders, graders, cranes, haul trucks, forklifts and mine-site support assets in one mixed-asset register. QR labels provide scan-based identification. Confirm the device, provider, delivered location or telemetry fields and rollout scope.

What GPS tracker type is best for heavy equipment?

Use QR labels for identification, then confirm any hardwired GPS, OEM, BLE, satellite or battery provider, hardware, fields and delivery before rollout. Confirm the device, provider, delivered location or telemetry fields and rollout scope.

Can GPS data trigger maintenance for heavy equipment?

Yes, through the hours. Run hours estimated from a tracker registered in MapTrack keep the machine's hours meter current, so its services fall due on use. On an automatic schedule, an hour reading someone records, on the pre start or the machine's record, raises the work order. A date puts a service due soon and overdue and emails the assignee 7 days out. Enter hour or odometer readings manually for meter-based service planning. A failed inspection does not create follow-up work unless a workspace owner configures and tests the form-submission automation. Schedules can use time or meter triggers. Choose manual, automatic per asset or automatic batch generation, then confirm the baseline and work-order defaults with a controlled test. A failed submission doesn’t create follow-up work by default. A workspace owner can configure a form-submission automation to create a task or work order from selected results. Test the trigger, conditions and action with one controlled submission before rollout.

How do jobsite geofences help?

A separately scoped MapTrack Telematics deployment can provide geofences and trip history. Confirm the device, provider, delivered location or telemetry fields and rollout scope. Assignment, service and entered cost records can support a project review. Confirm any required geofence, time-on-site, utilisation or cost-allocation report before rollout.

How is MapTrack different from a standalone GPS tracker?

MapTrack keeps the asset register, documents, inspections, service history and work orders together. QR labels identify assets without a configured device feed. Confirm the device, provider, delivered location or telemetry fields and rollout scope.

How do civil contractors track hours and servicing for skid steers, loaders and rollers across brands?

Put every machine on one register, whatever the brand. In MapTrack the hours come from the pre start, a hardwired tracker's estimate, or Cat, Komatsu, JCB and Volvo CE machines' own telematics, set up by our team. One service plan per machine holds its hour services, and on an automatic schedule an hour reading someone records raises the work order.

Which tracker suits a skid steer or bobcat?

A hardwired tracker such as the G70 or Dart3 if the machine has a usable power supply, so its estimated run hours follow the ignition; a battery tracker such as the Barra GPS where it hasn't. In MapTrack the tracker sits on the machine's record, and its estimated hours keep the service plan current. Our trackers ship within Australia and New Zealand; elsewhere we connect your existing trackers with you.

Does MapTrack do grade control or machine guidance?

No. MapTrack doesn't do grade control or machine guidance; the machine's own control system does that. MapTrack keeps the record beside it: the machine's hours from its hour meter, or estimated by its tracker, its services and pre starts, where its tracker last placed it, and its files.

How do we track hours on a roller or grader without OEM telematics?

Three ways in MapTrack: the operator records the hour meter on the daily pre start, someone records it on the machine's record, or a hardwired tracker registered in MapTrack estimates run hours from the ignition. Cat, Komatsu, JCB and Volvo CE machines' own telematics can also feed engine hours in, set up by our team.

How often should a skid steer be serviced?

Follow the maker's manual for the model. Bobcat's schedule for the S590 skid-steer loader, for example, lists the engine oil and filter, fuel filter and drive belts every 250 hours or 12 months, and the hydraulic filter and fluid every 1,000 hours or 12 months, with daily and 50-hour checks before them. In MapTrack one service plan holds those hour services and works out when the next one falls due.

Can the crew do the loader pre start offline?

Yes. Forms submit offline and sync when the phone reconnects, so an operator out of reception can finish the pre start at the machine in MapTrack. Open it by scanning the machine's QR label while there's coverage, or from a form already loaded on the phone. Fault Present opens a required fault note and photo, and a rule you set up can raise a linked corrective task.

Can we keep buckets, forks and other attachments with the machine?

Yes. Add attachments as accessories or sub-assets of the loader or skid steer in MapTrack. Accessories are confirmed out and back on a check-out, with a reason for anything missing, and a Bluetooth tag on a bucket or hammer is picked up by a gateway tracker on the machine.

Do skid steer or loader operators need a licence in Australia?

Not a high risk work licence: in Australia, earthmoving machines aren't one of the licence classes in Schedule 3 of the WHS Regulations. The business must still make sure each operator is competent on that machine and its attachments, and SafeWork NSW lists VOCs, training records and on-site assessments as evidence. MapTrack keeps those tickets and a signed VOC form on the operator's record; it doesn't check an operator against a machine.

Can we see which machines are due for a service across sites?

Yes. The Service Board in MapTrack lists every machine's next service, overdue ones first, with its current hour reading, the reading it falls due at and an estimated date from its recent use. An overdue service is also flagged when someone books or checks the machine out.

Does a tracker or the machine's telematics raise the service work order?

Not on its own. Their readings keep the machine's hours current, so the service falls due on use and shows on the Service Board. On an automatic schedule, an hour reading someone records raises the work order, and a person can raise one for a machine or a batch in a couple of clicks.

Does the law set a service interval for earthmoving plant?

Not as a number of hours. In Australia, regulation 213 of the WHS Regulations has plant maintained and inspected by a competent person following the manufacturer's recommendations, or a competent person's where the maker has none, with a yearly inspection only where neither is reasonably practicable (Victoria has its own OHS rules). MapTrack holds the schedule you set from the maker's manual and the record of every service; it doesn't make a machine compliant.

Does LOLER apply when a loader or backhoe lifts?

In Great Britain, LOLER covers lifting equipment, with a thorough examination at least every 12 months (6 months for accessories and for lifting people) or under an examination scheme. If you lift with a loader or backhoe, ask your examiner whether LOLER applies to it. PUWER still asks for the machine to be kept in good repair, with any maintenance log kept up to date. MapTrack keeps each service and examination report on the machine it covers.

What do OSHA's rules say about earthmoving equipment?

In the US, OSHA's construction rules for earthmoving equipment (29 CFR 1926.602(a)) cover scrapers, loaders, crawler or wheel tractors, bulldozers, off-highway trucks, graders and similar equipment: seat belts, brakes that stop and hold the machine fully loaded, rollover protection, a horn on bidirectional machines such as rollers, compactors, loaders and dozers, and a reverse alarm or a signaller where the view behind is obstructed. 1926.20(b)(2) asks for frequent and regular inspections of equipment by competent persons the employer designates. MapTrack keeps each inspection and defect on the machine's record.
Hacer Group
5 stars on Capterra
“Thanks to MapTrack we know exactly where our gear is, who has it and when it needs servicing.”

Denis Slaviero

HSEQ Manager at Hacer Group

Build heavy equipment GPS tracking into your operating system

Use MapTrack to keep confirmed location, pre-start and maintenance records together, then verify the provider and reporting scope before rollout.