Commercial GPS

Commercial GPS tracking for plant, machinery and jobsites

Track excavators, vehicles, trailers, generators, attachments and operators with industrial GPS, BLE and QR. Connect live location to site utilisation, geofences, rate cards, pre-starts, work orders and job costing in one platform.

Book a demo View GPS hardware

Industrialbattery, hardwired & BLE GPS

150+OEM telematics data sources

Transparenttracker and data-plan pricing

Key takeaways

MapTrack is built for commercial GPS tracking across plant, machinery, fleet, trailers, tools and jobsites.
GPS data connects to geofences, utilisation, rate cards, pre-starts, maintenance and work orders.
Industrial hardware options include battery GPS, hardwired trackers, BLE gateway devices and satellite tracking.
OEM telematics integrations can feed GPS, engine hours, odometer readings and fault data into MapTrack.
Published GPS hardware and data-plan pricing gives buyers transparency before a deployment conversation.

Lachlan McRitchie

GM of Operations

|Reviewed by Jarrod Milford

Updated 9 July 2026

Trusted by construction, mining and field service teams

32+ verified reviews on G2 & Capterra

Capterra Best Value 2026 badge for Fixed Asset Management

Capterra Best Ease of Use 2026 badge for Fixed Asset Management

What we track

Commercial assets that need more than a pin on a map

MapTrack supports the mixed reality of jobsites: powered plant, unpowered assets, vehicles, operators, attachments and smaller equipment all tracked with the method that fits.

Excavators, loaders, rollers and graders
Trucks, utes, vans and service vehicles
Trailers, containers and mobile storage
Generators, pumps, compressors and light towers
Attachments, buckets, rippers and tilt hitches
High-value tools and portable equipment
Driver and operator BLE cards
Remote, offshore and satellite-tracked assets

The challenge

Most GPS tools stop at location. Jobsite teams need operations

A GPS portal can show dots on a map, but plant managers, maintenance teams and project teams need the data to flow into utilisation, costing, inspections and servicing. Otherwise the map becomes another disconnected system to reconcile.

Location data is trapped in a standalone GPS portal

GPS tells you where the excavator is, but the asset register, pre-start history, rate card and service schedule live somewhere else. MapTrack keeps location, compliance, maintenance and costing on the same asset record.

Site utilisation is guessed from calls and dockets

Without geofence time-on-site and movement history, teams rely on phone calls, hire dockets and whiteboards to work out whether equipment is being used. GPS should show which assets are active, idle or sitting on the wrong project.

Maintenance is not triggered by real usage

Calendar servicing misses the way plant actually works. A busy machine needs service by hours or kilometres, while idle plant should not be over-serviced. MapTrack connects runtime, odometer and pre-start data to work orders.

Rate cards and job costing need clean location evidence

Project costing breaks down when nobody can prove where an asset was used or for how long. Geofences, jobs and rate cards give finance and operations a better basis for utilisation and internal charge-out.

One platform

Industrial GPS, jobsite workflows and asset operations together

MapTrack combines commercial GPS tracking with the field workflows that make location data useful: geofences, pre-starts, maintenance, cost tracking, rate cards and mixed-method asset tracking.

Industrial GPS hardware

Battery-powered, hardwired, BLE gateway and satellite trackers for vehicles, trailers, plant and remote assets. Published hardware and data-plan pricing keeps deployment planning clear.

Explore industrial gps hardware

Jobsite geofencing and utilisation

Geofence project sites, yards and depots to measure time-on-site, movement history, idle assets and unauthorised movement across active jobs.

Explore jobsite geofencing and utilisation

Runtime and odometer maintenance

Trigger work orders from engine hours, odometer readings, calendar intervals, pre-start failures and OEM telematics so servicing follows real machine use.

Explore runtime and odometer maintenance

Plant, tools and operators in one register

Use GPS for high-value mobile plant, BLE for proximity and QR for the rest. Operators, assets, inspections and costs all connect to one operational record.

Explore plant, tools and operators in one register

Live location

See plant, fleet and high-value assets across every jobsite

MapTrack gives operations teams a commercial GPS view across plant, machinery, trailers, vehicles and mobile assets. Filter by site, asset class or status, then drill into the asset record for inspections, service history, documents and costs.

Live GPS map for fitted assets and telematics-connected machines
Battery trackers for trailers, generators and unpowered equipment
Hardwired trackers for fleet vehicles and powered plant
Satellite options for remote and offshore assets
GPS, QR, BLE and OEM data in the same asset register

GPS tracking feature

MapTrack live GPS map for commercial plant, machinery and fleet assets

Geofence utilisation

Turn site movement into utilisation and costing evidence

Create geofences around projects, depots and restricted zones. MapTrack records entry, exit and time-on-site events so managers can understand where equipment is used, where it sits idle and when it moves outside expected boundaries.

Site, depot, yard and restricted-area geofences
Time-on-site and movement history by asset
Unauthorised movement and after-hours alerts
Asset utilisation by site, project and class
Rate-card and job-costing context on the same asset

Geofence time onsite

MapTrack geofence reporting for jobsite utilisation and GPS time-on-site

Maintenance automation

Raise work orders from runtime, odometer and pre-start data

Commercial GPS becomes much more valuable when it drives maintenance. MapTrack combines GPS, OEM telematics, manual meter capture and pre-start failures to trigger work orders at the right time, with the asset history and location already attached.

Engine-hour, odometer and calendar-based service triggers
Pre-start defects can create work orders automatically
OEM feeds for GPS, hours, fault codes and odometer readings
Service history and costs stored against each asset
Maintenance due alerts for supervisors and workshops

Meter-based maintenance

“We needed one view of plant, vehicles and equipment across sites - not another GPS portal. MapTrack connects live location with pre-starts, maintenance and compliance, so the asset record tells the whole story.”
Fleet Maintenance Manager
Industrial contractor, Australia

Live GPS

plant and fleet visibility

Geofences

site movement alerts

One record

location, service and compliance

Built for commercial operations

A modern GPS stack for organisations with real jobsites

MapTrack is for teams that need more than a vehicle map. Fit industrial trackers where live location matters, use BLE and QR for the long tail of smaller assets, and keep the data connected to the workflows your crews already run.

Operations, plant, maintenance, safety and finance teams can work from the same source of truth. GPS events, inspections, work orders, documents, costs and site activity stay attached to the asset instead of spreading across separate portals.

GPS hardware Plant management Maintenance

GPS + BLE

Gateways, beacons and cards

QR fallback

For every non-GPS asset

OEM feeds

Hours, faults and location

Jobsite data

Geofences, costs and utilisation

Build the GPS layer your jobsite operation can actually use

Commercial GPS tracking, transparent hardware pricing and the workflows around it: geofences, rate cards, pre-starts, maintenance and job costing.

Start free trial

Used across Australia & New Zealand
Per-asset pricing
Unlimited users

Deployment plan

How teams roll out commercial GPS with MapTrack

Most teams start with high-value mobile assets, prove the workflow on live sites, then expand into BLE, QR and OEM data for full coverage.

Week 1

Map the asset classes and sites

Identify powered plant, unpowered assets, vehicles, trailers, tools and operators. Decide which need live GPS, which need BLE proximity and which only need QR scan-based tracking.

Week 1-2

Choose hardware and connect OEM feeds

Select battery, hardwired, BLE gateway or satellite trackers from the hardware store. Connect OEM or telematics feeds for machines that already publish GPS, engine hours or odometer readings.

Week 2-3

Create geofences and operational rules

Set up sites, depots, yards and restricted zones. Configure movement alerts, time-on-site reporting, utilisation views and the maintenance thresholds that should create work orders.

Week 3+

Tie GPS into daily workflows

Run pre-starts, meter readings, service triggers, rate-card costing and job reporting from the same asset records, then expand coverage across projects and regions.

Key features for commercial GPS tracking

Everything needed to turn GPS location into jobsite visibility, maintenance control and cost evidence.

GPS tracking GPS trackers Construction equipment GPS Heavy equipment GPS Bluetooth beacons Meter-based maintenance Cost tracking Plant management

GPS that joins the rest of the operation

Stop buying a map that your plant, maintenance and finance teams cannot use

MapTrack connects GPS hardware and OEM data to the workflows around the asset: geofences, pre-starts, work orders, utilisation and job costing.

Book a demo View GPS trackers

Frequently asked questions

Common questions about commercial GPS tracking for plant, machinery, fleet and jobsites.

Commercial GPS tracking for plant and machinery uses industrial hardware, OEM telematics or Bluetooth gateway data to show where high-value equipment is, how it moves between sites and how it is being used. MapTrack is built for mixed jobsite fleets: excavators, loaders, trucks, trailers, generators, attachments, tools and operators can all sit in one asset register with GPS, BLE, QR and telematics data feeding the same operational workflows.

MapTrack can track powered and unpowered assets including excavators, loaders, graders, rollers, generators, compressors, trailers, utes, trucks, service vehicles, containers and high-value tools. Hardwired trackers suit powered plant and fleet vehicles, battery trackers suit trailers and unpowered equipment, BLE beacons suit smaller assets, and OEM telematics integrations can bring machine data in without replacing existing hardware.

GPS positions and geofence events can show when an asset enters a site, leaves a site and how long it spent there. MapTrack connects that location history to sites, jobs, rate cards and asset records, so operations teams can review utilisation, time-on-site and cost allocation without manually reconciling whiteboards, spreadsheets and hire dockets.

Yes. MapTrack supports maintenance triggers from engine hours, odometer readings, calendar intervals, inspections and condition data. Readings can come from OEM telematics, supported GPS hardware or manual meter capture during pre-starts. When an asset reaches a service threshold, MapTrack can create a work order with the asset, location, service history and required task details attached.

Yes. You can create geofences around depots, project sites, yards and restricted areas. MapTrack uses geofence activity for movement alerts, time-on-site reporting, site utilisation and exception review. Teams use this to spot unauthorised movement, prove where equipment was, and understand which sites are using which machines.

Bluetooth Low Energy cards and beacons extend GPS beyond a single mounted tracker. A GPS gateway device can detect nearby BLE tags, so operators, tools, attachments or smaller equipment can be associated with the machine or vehicle moving through a site. This creates a practical bridge between live GPS for major assets and lower-cost proximity tracking for the rest of the jobsite.

Yes. The MapTrack hardware store lists GPS trackers, Bluetooth beacons, QR labels and compatible data plans. Battery-powered trackers, hardwired fleet trackers, BLE gateway devices and satellite options are available for different deployment needs. Bulk and complex deployments can be quoted by the MapTrack team, but buyers can still review hardware and data-plan pricing before speaking to sales.

Most fleet GPS portals focus on vehicles on a map. MapTrack is built for the wider jobsite operation: plant, vehicles, trailers, tools, pre-starts, maintenance, cost tracking, rate cards, geofences, OEM data and QR/BLE tracking all connect to the same asset record. That makes it better suited to organisations managing plant, machinery and commercial assets across active worksites.

Resources for commercial GPS tracking

Guides, store pages and use cases for tracking plant, machinery and fleet across jobsites.

Track plant, machinery and jobsites from one platform

Use industrial GPS hardware, BLE, QR and OEM data to connect live location with pre-starts, maintenance, geofences, rate cards and job costing.