Skip to main content

Excavator GPS

GPS tracker for excavators

Know where every machine is, how many hours it's done, when it's due for a service and whether the pre start got done. Trackers, Bluetooth tags and QR labels all land on one record in MapTrack.

600,000+assets tracked since 2012
150+telematics, fleet and fuel-card data sources
24/7support
An orange excavator on top of a dirt mound under a cloudy sky, with a MapTrack service history entry laid beside it.
Service history
MapTrack maintenance history entry: a 250 hour service with runtime hours of 1,452 and its work order, WO-00028.
GPS trackerExample: MapTrack Telematics
Pre start doneExample: today, EX-01
Service history
MapTrack maintenance history entry: a 250 hour service with runtime hours of 1,452 and its work order, WO-00028.
GPS trackerExample: MapTrack Telematics
Pre start doneExample: today, EX-01
Service history
MapTrack maintenance history entry: a 250 hour service with runtime hours of 1,452 and its work order, WO-00028.
Pre start doneExample: today, EX-01
GPS trackerExample: MapTrack Telematics

How MapTrack runs excavators

The tracker for each machine, the hours that drive the servicing, the pre start on the phone, and the files and costs on the same record.

The short answer

MapTrack tracks excavators with a hardwired or battery GPS tracker on each machine, Bluetooth tags on buckets and hitches, and a QR label in the cab. Estimated run hours from the tracker keep the hour meter current, so services fall due on use, and operators do the pre start on a phone.

Lachlan McRitchie

Lachlan McRitchie

Co-Founder & GM of Operations

Published 9 July 2026Updated 17 October 2026

Key takeaways

  • One record per excavator in your asset register: QR label, tracker, attachments, pre starts, service history, documents and costs.
  • Estimated run hours from the tracker keep the hour meter current, so tiered 250, 500 and 1,000 hour services fall due on use.
  • Live GPS, geofences and trip history run in MapTrack Telematics; the app shows each machine's latest linked GPS position and your site boundaries.
  • Cat, Komatsu, JCB and Volvo machines' own telematics can feed engine hours, location, fault codes and fuel used into MapTrack, set up by our team.
  • Operators do inspections and pre starts on a phone; a failed check opens fault and photo fields, and a rule you set up can raise a linked task.

Trusted by construction, mining and field service teams

RIXHacer GroupMineral ResourcesSaunders InternationalSupagasMetro Tunnel
G2 rating 4.9 out of 5
Capterra rating 5.0 out of 5GetApp rating 5.0 out of 5Software Advice rating 5.0 out of 5
15 reviews on G2 · the same 17 reviews on Capterra, GetApp and Software AdviceCapterra Best Value 2026 badgeCapterra Best Ease of Use 2026 badgeAll MapTrack reviews

Customer proof

What plant customers say

“Finally we've got everything in one place - I would recommend this platform to anyone.”

Ashley Sutherland, Plant & Logistics Administrator, RIX Specialist ContractingReview on G2
  • From the published story: Safety audit documentation that previously took 2–3 days to compile can now be retrieved instantly from the platform on any device.
Read the RIX Specialist Contracting story

“Thanks to MapTrack we know exactly where our gear is, who has it and when it needs servicing.”

Denis Slaviero, HSEQ Manager, Hacer GroupReview on Capterra
Read the Hacer Group story

“MapTrack streamlines tracking and asset servicing across mine shutdowns - simple, reliable, and effective.”

Gordon Stennings, Maintenance Storeman, Mineral Resources
  • From the published story: The end-of-shutdown reconciliation - previously a multi-day exercise - is now completed in hours.
Read the Mineral Resources story

Want to see it on your own excavators?

Book a demo

30 minutes on Microsoft Teams

Pick the right tracker for each machine

Most fleets mix two or three of these. Big machines get a wired tracker, minis that get floated around get a battery unit, attachments get Bluetooth tags, and every machine gets a QR label. Where the maker's own telematics is already on the machine, our team can feed it in instead.

  • G70 hardwired GPS tracker: a black sealed box with a power cable and mounting lugs

    Large excavators with a usable power supply

    Hardwired GPS tracker (G70)

    • Location on the machine's record
    • Estimated run hours into the hour meter
    • Vehicle battery voltage
    • Picks up Bluetooth tags on the attachments

    Good to know: Not a stick-on job: it's wired into the machine's power

  • Remora3 high-capacity GPS tracker, top view of rugged black enclosure

    Minis that get floated between sites, and machines you'd rather not wire

    Battery GPS tracker (Remora3, magnetic)

    • No wiring: it mounts magnetically
    • Location and tracker battery level
    • Estimated run hours into the hour meter
    • Picks up Bluetooth tags nearby

    Good to know: No vehicle battery voltage, because it isn't wired in

  • Blue PUCK ID Bluetooth tag: a small, round, grey tag with the Bluetooth mark

    Buckets, hammers, augers, rippers and tilt hitches

    Bluetooth tag

    Bluetooth (BLE) 5.0

    • Each attachment's location in MapTrack, updated when a gateway tracker (Oyster, Remora3, G70 or Dart3) picks it up

    Good to know: No location of its own: it needs a gateway tracker in range

  • Medium custom QR asset label with logo and phone details

    Every machine, for pre starts, audits and the record

    QR labels

    • Scan with a phone to open the record or start the pre start
    • Yard audits by scan

    Good to know: A plain scan records no location

  • Cat, Komatsu, JCB and Volvo machines that already have the OEM telematics on board

    The machine's own telematics

    • Engine hours, location, fault codes and fuel used into MapTrack
    • No extra hardware on those machines

    Good to know: Set up by our team rather than by you

Our trackers ship within Australia and New Zealand; elsewhere we connect your machines' own telematics or existing trackers with you.

What it costs

MapTrack is priced per asset, and the plans are on the pricing page. Trackers, QR labels, install and freight are quoted with your order, after a short setup call so each asset gets the right tracker.

One machine, tagged three ways

A tracker on the machine, Bluetooth tags on its buckets and hitch, and a QR label in the cab all land on the same asset record.

  1. Tracker on the machine

    Location and estimated run hours

  2. Bluetooth tags on the attachments

    Picked up by that tracker, so each attachment updates too

  3. QR label in the cab

    Scan to open the record or start the pre start

Example record

  • CAT 320, next service due soon
  • pre start passed this morning
  • bucket and tilt hitch on board
Example values from a demonstration workspace, not customer data.
MapTrack asset record for a CAT 320 Excavator: QR code, category Heavy Plant then Excavators, tag DC-00001 and Deployed status; tabs including Maintenance (1), Forms (7) and Files (6); a Details card with make Caterpillar, model 320, year 2021, serial and fleet number EX-01; a Plant Service Plan flagged Overdue; the asset photo; an active 250 hour service work order, WO-00033; four sub-assets: Batter Bucket 1800mm, GP Bucket 1200mm, Tilt Hitch and Trenching Bucket 600mm; and the Runtime Hours meter.

One excavator’s record, attachments included

CAT 320 EX-01’s record: its QR tag, details and photo, the overdue Plant Service Plan with its open 250 hour service work order, the runtime hours meter, and its buckets and tilt hitch as sub-assets on the same record.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport on the asset’s Overview tab, cropped right of the navigation sidebar. Notes, parts, vendors and activity continue further down the page.

Run-time hours, kept current

Every excavator's hours sit on its record, and its service plan runs off them. A hardwired or battery tracker estimates run hours and keeps the hour meter current; Cat, Komatsu, JCB and Volvo machines can feed their own engine hours instead, set up by our team.

  • Estimated run hours from the tracker update the hour meter in MapTrack
  • The next due date is forecast from how hard each machine is working
  • Stale readings are flagged, so a meter that stops updating gets noticed
CAT 320 Excavator Maintenance tab in MapTrack: the Plant Service Plan is overdue, last service Aug 12, 2026, next due 3 hours over; a current runtime hours reading of 4,146 hours against a service due at 4,143 hours, with a View WO-00033 button; beside it a MaintScore of 84, Good, with 100% quality, a 100% planned ratio and 1 service logged this year.

Hours against the next service

An excavator’s runtime hours, typed in on the asset, set against its next 250 hour service: 4,146 hours, 3 hours past the 4,143 hour service, with a button to open work order WO-00033. The reading shown was entered by hand, not reported by a device.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport, scrolled to the asset’s service plan. The reading was entered in the app that day.

Want to see it on your own excavators?

Book a demo

30 minutes on Microsoft Teams

Hours drive the servicing

One service plan holds your 250, 500, 1,000 and 2,000 hour services, and when two coincide the bigger one covers the smaller in one work order. The next due date is forecast from how hard the machine is working, stale readings are flagged, and the Service Board shows what's overdue and due soon.

  • On an automatic schedule, an hour or odometer reading someone records raises the work order for you, one per machine or one batch for everything due together
  • Dates put services due soon and overdue, and the assignee gets an email 7 days out
  • Schedule triggers can also be set by time or service interval, and a person raises per-asset or batch work orders from the schedule in a couple of clicks
  • One work order can cover several machines, each with its own pass or fail
  • Labour, parts and other costs on work orders stay in the machine's service history
MapTrack Plant Service Plan with 250, 500 and 1,000-hour services and a sequence preview showing which service covers the smaller ones.

Build a plan with separate service levels

The plan runs a 250-hour service, a 500-hour service that covers it, and a 1,000-hour service that covers both. The sequence preview shows the whole 1,000-hour cycle and where it starts again.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration plan. Each level carries its own triggers, procedure, parts and work-order defaults. Follow your equipment manufacturer’s service intervals.

250 hoursEngine oil and filter, when none of Cat oil, Cat filters and S·O·S oil sampling is used, or in severe service without samplingSourceCat 320 / 320 GC parts reference guide
500 hoursFirst change of engine oil and filter, final drive oil and swing drive oil; then engine oil and fuel filters every 500 hours when two of Cat oil, Cat filters and S·O·S sampling are usedSourceCat 320 / 320 GC parts reference guide
1,000 hoursEngine oil and fuel filters on most 320s built from about 2019 when all three are used; swing drive oilSourceCat 320 / 320 GC parts reference guide
2,000 hoursFinal drive oil, the fuel tank cap and the engine crankcase breatherSourceCat 320 / 320 GC parts reference guide

These are Caterpillar's figures for the Cat 320 and 320 GC with serial prefixes HEX, MYK, KTN and LKS. Intervals change between makers, models, engine generations and conditions: Cat lengthens the oil interval only with its own oils, filters and S·O·S sampling, and shortens it for severe service. Follow the operation and maintenance manual for your machine's serial number.

Pre starts on the phone

Operators scan the QR label in the cab and do the pre start on their phone. A failed check opens the fault description and photo fields, a rule you set up can raise a linked corrective task, and the completed pre start downloads as a PDF with its pass and fail colours. Forms submit offline and sync when the phone gets reception back.

MapTrack Excavator Pre-Start Check on a phone: Fail selected for hydraulic hoses and fittings, the fault description and photo fields open below it, Pass selected on the next check, and the Submit button.

Tap Pass, Fail or N/A on a phone

A Pass, Fail or N/A question shows as large coloured buttons. Choosing Fail on the hydraulic hoses opens the fault description and photo fields.

MapTrack app · Demonstration data · Captured

About this screenshot

Captured at a 430 x 932 phone viewport in a demonstration workspace and shown in a phone frame. Questions render as buttons when their choices are a Pass/Fail-style set.

Site boundaries and geofences

Draw each site's or yard's boundary on its map in MapTrack and see the gear there; each machine's record shows its latest linked GPS position. Live GPS, trips, history and alerts on entering or leaving a boundary run in MapTrack Telematics, from the same vendor and account.

  • A boundary for every site and yard, drawn on the map in MapTrack
  • Alerts on entering or leaving a boundary, in MapTrack Telematics
  • Time-on-site reports from those boundaries also run in MapTrack Telematics, and show presence on site, not engine hours
Satellite map of a civil site in Clyde North, Victoria, in MapTrack: a boundary named Site boundary, a custom area drawn as an orange dashed outline around a cleared lot, with a marker for the 17 assets assigned to the site at its centre, zoom controls, map layer buttons and an Add button for another boundary.

A site’s boundary on its map

A site’s boundary in Clyde North, drawn on its map in MapTrack, with a marker for the 17 assets assigned to the site. None of them has a tracker, so they show at the site rather than at a live position.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport on the location’s Overview tab. The map was dragged to centre the site and zoomed in one step; the map card is cropped from the page.

Want to see it on your own excavators?

Book a demo

30 minutes on Microsoft Teams

Bookings, check-outs and yard audits

Book a machine for a job ahead with Requests, approve it, fulfil it by scan and turn it into a check-out to a person and site.

  • Where it was last checked out or returned, when there's no tracker on it
  • Accessories confirmed out and back, with a reason for anything missing
  • Yard audits by scan: at the end you choose Mark Missing or Skip All
MapTrack Assignments table listing eight tool and equipment assignments, a GNSS rover, robotic total station, two plate compactors, a lighting tower, a cordless drill, an angle grinder and a rotating laser level, each with its photo, the person it went to, a Complete or Active status and a due-back date. One plate compactor is flagged Overdue.

See who has each tool and when it is due back

Every sign-out in one list. Four assignments are back and marked Complete; four are still out as Active, each with the person and the due-back date. The plate compactor with James Ward was due back on 23 September, so it is flagged Overdue.

MapTrack app · Demonstration data · Captured

About this screenshot

Captured in a demonstration workspace on the All assignments view with the Person, Status and Due Back Date columns. The app shortens long asset and category names.

Files, risk assessments and the operator

Keep each machine's paperwork on its record, and each operator's sign-off on theirs.

  • The operation and maintenance manual
  • Service history
  • Plant risk assessment
  • Registration and insurance documents
  • A VOC form signed off on each operator's person record
Files tab of a CAT 320 Excavator in MapTrack, showing 6 files: PDFs named Plant risk assessment (301.45 KB), Excavator pre-start checklist (442.54 KB) and Excavator 500-hour service procedure (492.08 KB), added a minute before the capture, and the excavator’s photo marked Primary, with Search for files, All files, Newest file and Attach controls.

The excavator’s paperwork on its record

A plant risk assessment, a pre-start checklist and a 500 hour service procedure kept on the CAT 320’s own record, next to its photo. These three are MapTrack’s free templates, saved as PDFs and attached in the app.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration workspace at a 1440 px desktop viewport on the asset’s Files tab, cropped to the first row of its six files. The three PDFs were attached with Attach that day.

Costs, hire and depreciation

Every service keeps its labour, parts and other costs.

  • Finance and costings, an add-on on Pro and Enterprise plans: a cost ledger for every machine, with budget against actual, depreciation and repair-or-replace guidance
  • Rate cards, an add-on on Pro and Enterprise plans: daily, weekly and monthly hire rates, dry, wet or standby
  • Asset Performance shows each machine's utilisation: how much it was allocated to jobs, from recorded check-outs and bookings
Asset Depreciation report showing total purchase value, current book value, total depreciation, average depreciation rate, Asset Value Over Time and Remaining Life Distribution.

Read calculated values from the configured report

The summary shows calculated purchase value, book value and depreciation for assets with eligible source data. Remaining Life Distribution describes the calculation, not the equipment’s physical condition.

MapTrack app · Demonstration data · Captured

About this screenshot

Demonstration report using Straight Line, AUD, five-year useful life and zero residual value. These example values are not customer results or tax calculations.

Free excavator pre starts, inspections and service sheets

Daily pre starts, monthly inspections, bucket and undercarriage checks, and the 250 to 2,000 hour services. Print them, or run the pre starts and the 250, 500 and 1,000 hour services on the phone in MapTrack.

How to do an excavator pre-start

Want to see it on your own excavators?

Book a demo

30 minutes on Microsoft Teams

Common questions

What's the best GPS tracker for an excavator?

For most excavators, a hardwired tracker such as the G70 is the best fit: it runs off the machine's power, reports location and gives estimated run hours that keep the hour meter current. For minis that get floated between sites, or machines you'd rather not wire, a battery tracker like the magnetic Remora3 works without wiring. Buckets, hammers and hitches get Bluetooth tags that a gateway tracker picks up. Our trackers ship within Australia and New Zealand; elsewhere we connect your machines' own telematics or existing trackers with you.

How do I track engine hours on my excavators?

Three ways, and you can mix them across a fleet. A Digital Matter tracker registered in MapTrack feeds estimated run hours into each machine's hour meter. Cat, Komatsu, JCB and Volvo machines' own telematics can feed engine hours into MapTrack once our team sets the feed up. Or someone types the hour reading in on the machine's record. However the reading arrives, the tiered service plan uses it to put the next 250, 500, 1,000 or 2,000 hour service due.

Do I need a GPS tracker if my excavator already has OEM telematics?

Not always. If your Cat, Komatsu, JCB or Volvo machines already report through their maker's telematics, our team can set that feed up in MapTrack so engine hours, location, fault codes and fuel used come through without extra hardware. Older machines, minis and other brands get a tracker or a QR label instead, so the whole fleet sits in one asset register rather than a separate portal for each brand.

Can operators do the excavator pre start offline?

Yes. Pre start forms submit offline and sync when the phone gets reception back. A failed check opens the fault description and photo fields, and a rule you set up can raise a linked corrective task. The completed pre start downloads as a PDF with its pass and fail colours.

How do I keep track of buckets, hammers and hitches?

Put a Bluetooth tag on each attachment. A gateway tracker on the machine or the ute (Oyster, Remora3, G70 or Dart3) picks the tags up and updates each attachment's location in MapTrack. Attachments can also go out as accessories on a check-out, so the crew confirms what went with the machine and what came back, with a reason for anything missing.

How do I stop excavators going walkabout?

Draw each yard's and site's boundary on its map in MapTrack and see which machines are there, and keep a tracker on every machine that leaves the yard. Live GPS, trips, history and alerts on entering or leaving a boundary run in MapTrack Telematics.

Does MapTrack work for a mixed-brand excavator fleet?

Yes. Every machine gets the same record whatever its brand or age: a tracker or the maker's own telematics for hours and location, a QR label for pre starts and audits, and the same service plans, files and costs. You're not checking a separate portal for each brand.

Do you need a licence to operate an excavator in Australia?

Not to dig. Australia's high risk work licences have no class for operating an excavator, but the employer must give operators suitable training, and a verification of competency (VOC) is one way to show it. Lifting is different: whoever slings the load may need a dogging licence, and in Western Australia, using earthmoving machinery as a crane with a safe working load over 3 tonnes has needed a high risk work licence since 10 August 2025. In MapTrack, the VOC can be recorded as a form signed off on the operator's person record.

Is an excavator registrable plant?

No. Excavators aren't on the WHS registrable plant lists, so the records duty for registered plant doesn't apply to them. The law still requires plant to be maintained and inspected by a competent person in line with the manufacturer's recommendations, so service history, pre starts and inspections are good practice and your evidence if something goes wrong. MapTrack keeps them, with costs and documents, on each machine's record.

What's a digger tracker?

A digger tracker is an excavator GPS tracker: digger is the everyday word for an excavator in the UK, Ireland, Australia and New Zealand. In MapTrack a digger gets a hardwired or battery GPS tracker, Bluetooth tags on its buckets and attachments, and a QR label in the cab, and its pre starts and hour-based services sit on the same record. Our trackers ship within Australia and New Zealand; elsewhere we connect your machines' own telematics or existing trackers with you.

Does a GPS tracker work on a mini digger?

Yes. A mini digger or mini excavator gets the same record as a bigger machine. A hardwired or battery GPS tracker puts its latest position in MapTrack, with live tracking, geofences and trip history in MapTrack Telematics, and its pre starts and hour-based services sit on the same record.
Hacer Group
5 stars on Capterra
“Thanks to MapTrack we know exactly where our gear is, who has it and when it needs servicing.”

Denis Slaviero

HSEQ Manager at Hacer Group

See your excavators in MapTrack

Book a demo to see how your machines, hours, pre starts and servicing would look in MapTrack, or look at the trackers first.