MapTrack + Geotab Integration
Combine the power of Geotab GO fleet telematics with MapTrack's unified asset management platform. GPS location, odometer, engine hours, fuel data, diagnostic fault codes, and driver behaviour events flow from every Geotab-connected vehicle into a single dashboard - alongside OEM telematics from Caterpillar, Komatsu, John Deere, and 140+ other integrations. Whether you run a delivery fleet, a transport operation, or a mixed fleet of vehicles and heavy equipment, MapTrack gives you one place to manage it all.
What you get
Geotab GO device data syncs into MapTrack continuously via the Geotab API. No CSV exports or manual data entry.
Real-time GPS location
Track every Geotab-connected vehicle on a live map with breadcrumb trails, geofence entry/exit alerts, and multi-site filtering across your entire operation.
Odometer and engine hours
Accurate mileage and hour data from Geotab GO devices feeds into MapTrack maintenance schedules, ensuring service intervals are triggered automatically.
Fuel consumption and idle time
Monitor fuel burn rates, detect excessive idling, and benchmark fuel efficiency across drivers and vehicles to reduce operating costs.
Driver behaviour scoring
Harsh braking, rapid acceleration, speeding, and seatbelt events from Geotab are logged per driver in MapTrack for safety coaching, compliance, and insurance reporting.
Diagnostic fault codes (DTCs)
Vehicle fault codes surface in MapTrack as they occur, allowing your workshop or roadside team to respond before a minor issue becomes a breakdown.
Unified mixed-fleet dashboard
Geotab vehicles appear alongside OEM-connected plant, QR-tagged tools, and other tracked assets in one platform, eliminating the need for multiple logins and portals.
How it works
Connect
Authorise MapTrack to access your Geotab MyGeotab account via the Geotab SDK. The connection is secure and takes just a few minutes to set up.
Configure
Choose which vehicles to sync, set data refresh intervals, map Geotab fields to your asset register, and configure geofence, maintenance, and driver safety rules.
Automate
GPS, odometer, fuel, fault codes, and driver events flow into MapTrack continuously. Maintenance scheduling, utilisation reports, and safety alerts run on autopilot.
Frequently asked questions
What data does the MapTrack + Geotab integration sync?
The integration syncs GPS location, odometer readings, engine diagnostics, diagnostic fault codes, idling time, and driver behaviour events, including harsh braking, rapid acceleration, and speeding, from Geotab GO devices directly into your MapTrack asset register. Fuel consumption levels and vehicle status data are also captured.
Which Geotab GO devices are compatible with MapTrack?
MapTrack works with the full range of Geotab GO devices, including GO9, GO9+, GO9 RUGGED, and the latest GO device models. Any vehicle fitted with a Geotab GO device that reports to your MyGeotab account will sync to MapTrack automatically, covering passenger cars, light commercial vehicles, trucks, buses, and heavy equipment with OBD-II or J1939 diagnostic ports.
How do I set up the MapTrack + Geotab integration?
Setup takes about five minutes. From your MapTrack account, navigate to Integrations, select Geotab, and authorise access to your MyGeotab database using your Geotab credentials. MapTrack connects via the Geotab SDK. No hardware installation or vehicle downtime is required. Once connected, choose which vehicles to sync and configure your data refresh intervals.
Does the integration provide real-time data or batch updates?
MapTrack supports both modes. GPS positions and critical fault codes can sync in near real-time with refresh intervals as short as every few minutes. For less time-sensitive data like odometer, engine hours, and driver behaviour summaries, you can configure batch sync intervals - hourly, every four hours, or daily to balance data freshness with API efficiency.
Do I need a Geotab MyGeotab account to use this integration?
Yes. You need an active MyGeotab account with API access enabled. MapTrack connects to the Geotab cloud through the MyGeotab API, so your vehicles must be reporting to your MyGeotab database. If you already use MyGeotab to manage your fleet, you are ready to connect. No additional Geotab subscription or add-on is required.
Does the MapTrack + Geotab integration cost extra?
The Geotab integration is included on all MapTrack plans at no additional charge. You pay your standard MapTrack per-asset subscription and your existing Geotab subscription. There are no integration fees, middleware costs, or per-sync charges. Start a free trial to test the connection with your fleet before committing.
Explore related resources
All Integrations
Browse 140+ OEM telematics, fuel card, and accounting integrations.
Integration Features
Learn how MapTrack unifies telematics data from every OEM into one platform.
GPS Tracking
Real-time location, geofencing, and movement history for every asset in your fleet.
Maintenance & Work Orders
Automate preventive maintenance with odometer and hour triggers from Geotab data.
Construction
See how construction companies track plant, vehicles, and tools across job sites.
Transport & Logistics
Fleet tracking, driver management, and compliance for transport operators.
Connect your Geotab fleet to MapTrack today