Free PPE issue register
Free PPE issue register (PDF-ready). Record what protective equipment was issued to each worker, when, in what size, with a signature on receipt.
Download free PDF template
Use in MapTrack →Trusted by teams across Australia and New Zealand
We respect your privacy. Unsubscribe anytime.
Updated 26 Oct 2026
How to use: download the PDF, print or complete digitally on any device.
- PDF format, ready to print or fill on screen
- Use as-is or customise to suit your operation
- Go digital in MapTrack for photos, reminders and audit trails
Or set it up in MapTrack
- Fill it in on a phone, attach photos to any check
- Automatic reports and audit trails
- Upload the PDF and MapTrack drafts the form for you
Free trial. No credit card. Personal email accepted.
Don't just download it - use it live. Start a free workspace, upload this PPE issue register and MapTrack drafts it as a form your crew can run from a phone.
Co-Founder & Commercial Director
Short answer
A PPE issue register records which personal protective equipment each worker received: item, size, issue date and condition, the worker's signature, the instruction given, replacements with reasons, and returns. Supervisors or stores staff make an entry at every issue, replacement and return. Regulation 44 of the model WHS Regulations requires suitable PPE to be provided, maintained and used; regulation 46 sets the worker's duties.
Checked against Model WHS Regulations as at 5 December 2025 (cited within as the Work Health and Safety Regulations 2011) on by the MapTrack templates team. How we check templates
Key takeaways
- The MapTrack PPE issue register has 6 columns and room for 12 entries. Columns: PPE item issued (type, make, standard), Size, Qty, Date issued, Expiry / replace by, Reason.
- A PPE issue register is a custody record: it connects a specific item to a named worker on a specific date.
- Provision alone does not meet the duty, which also covers suitability, fit, maintenance, replacement and use.
- Record the reason for every replacement, because the pattern of reasons is what points at the real problem.
- Respirators need a recorded fit test, and harnesses, helmets and filters have service lives that apply regardless of condition.
- Close out leavers by recording what was returned, its condition and what was taken out of service.
Enter your email below to download this PPE issue register as a ready-to-use PDF.
Used by construction, mining and field service teams
What is a PPE issue register?
A PPE issue register is the signed record of what personal protective equipment has been given to each worker, in what size, on what date, and in what condition. It is a custody document rather than a stock report: the entry that matters is the one where a named worker signs to confirm they received a specific item, were shown how to use and check it, and understand when it has to be replaced. Alongside the issue it records replacements, the reason for each one, and the return of items when a worker leaves or changes role.
Providing protective equipment is only part of the duty. Work health and safety regulations require a business to provide PPE that is suitable, that fits the worker, that is maintained and replaced, and to make sure it is actually used, while workers have their own duty to wear it and to report damage. None of that is demonstrable from a purchase order. The issue register is what connects the item to the person, which is why it is the first document asked for after an incident where protective equipment either failed or was not being worn.
Learn more about compliance and inspections in MapTrack.
See who holds which hard hat, respirator and gas monitor, and when each is due for inspection: PPE register software.
Get the free template
Enter your email above to download the full PPE issue register as a PDF.
Benefits of using this PPE issue register
- Proves provision to the individual: a signed entry links a specific item to a named worker on a specific date.
- Fit and suitability recorded: capturing size, type and any fit test result shows the equipment was matched to the person.
- Replacement is scheduled, not reactive: recording issue dates and expected life makes worn or expired items visible before they fail.
- Instruction is evidenced: a tick confirming the worker was shown how to fit, check and store the item closes a common audit gap.
- Cost visibility: repeated replacements for the same worker or crew show where equipment is being lost, misused or wrongly specified.
- Clean exits: recording what was returned when a worker leaves stops expensive equipment walking out with them.
- Audit evidence: a dated, signed register is the practical proof that protective equipment duties are being met day to day.
Benefits of digitising forms in MapTrack
When you move your log / registers from paper to MapTrack, you get:
- Field users can easily scan a QR code to complete a form on mobile. Unlimited users.
- Email the right people when a form is submitted, with an automation you set up.
- File every completed form against the asset, location or person it covers.
- Download any completed form as a PDF, with failed answers listed at the top.
- Fill in forms offline; they upload when the device is back online.
- Build conditional logic (show or hide questions based on answers).
- Take pictures or attach photos. Not possible with a paper-based form.
- Electronic signatures.
- Edit forms later without reprinting.
- Set who can view, fill in or edit forms with user roles.
- Upload a paper form (PDF, Word, Excel or a photo) and MapTrack's AI builds a digital version for you to check.
- Email safety managers when a hazard report is submitted, with an automation you set up.
- Keep every hazard and incident report against the site it came from, with photos.
- Turn a hazard report into a corrective-action work order with its own review step.
See how MapTrack handles log / registers: PPE register →
Try MapTrack free
Full access to every feature. No credit card required. Per-asset pricing so you scale as your fleet grows.
- No credit card required
1-2 days/week saved
“Bloody amazing! We used to spend 1-2 days a week tracking and managing our generators alone.”
Steve McAllister
Asset Coordinator, Saunders International
What to include in a PPE issue register
This PPE issue register covers 10 key areas:
- Worker name, employee or contractor number, role, crew or department and start date
- Item issued: type, description, make and model where it matters, and any standard it is certified to
- Size and fit details, including the result and date of any fit test for respiratory protection
- Date issued, quantity, and whether the item is new or a replacement
- Reason for issue: initial issue, replacement due to wear, damage, loss or expiry, or a change of role or task
- Expiry or expected replacement date, particularly for helmets, harnesses, respirators and filters
- Confirmation that instruction was given on fitting, use, inspection, cleaning and storage
- Worker signature and date acknowledging receipt and understanding of their obligation to use it
- Issuer name and signature, so the entry is attributable at both ends
- Return or disposal record, with the date, condition and reason, for items handed back or taken out of service
How to use this PPE issue register
- Work out what is required before you issue anything: Base the issue on the risk assessment for the work rather than on a standard starter pack. Issuing the wrong protection is worse than issuing none, because it creates confidence without protection, and it is the outcome an inspector notices first.
- Fit the item to the person: Check size and fit with the worker present rather than handing over a box. For respiratory protection, complete and record a fit test, and note anything, such as facial hair, that affects the seal and the choice of respirator.
- Give instruction at the point of issue: Show the worker how to fit the item, how to check it before each use, how to clean and store it, and when it must be replaced. Tick the instruction box only when this has actually happened, not as a matter of routine.
- Have the worker sign, and sign it yourself: The worker signs to confirm receipt and that they understand their duty to wear and look after the item. The issuer signs too, so the entry is attributable at both ends rather than resting on one signature.
- Record replacements with a reason: Every replacement gets its own line with the reason: wear, damage, loss, expiry or a change of task. The reasons are the useful part, because a pattern of loss or early wear usually points at storage, specification or the task itself.
- Review expiry dates and close out leavers: Check the register regularly against expiry and expected replacement dates so nothing stays in service past its life. When a worker leaves or changes role, record what was returned, its condition and what was disposed of.
In MapTrack, you can digitise safety inspections and compliance forms. Each submission is stored as a timestamped PDF against the asset record.
Get the free templateEnter your email above to download the full PPE issue register as a PDF.Back to download formHow often should you complete this log / register?
Make an entry at every issue, replacement and return, without exception. A register with gaps is worse than no register at all, because it implies a system that was not followed.
Review the whole register at least quarterly against expiry and expected replacement dates, and more often where the work involves respiratory protection or fall arrest, since both have hard service lives and both fail quietly. Re-check fit whenever a worker changes role, where the task or hazard changes, and after any significant change in the worker that could affect the seal or fit of the equipment.
Try MapTrack free
Full access to every feature. No credit card required. Per-asset pricing so you scale as your fleet grows.
- No credit card required
Frequently asked questions
What do work health and safety laws require a business to do about PPE?
What is the difference between a PPE issue register and a PPE inspection checklist?
Does the worker have to sign for the equipment?
Do items need an expiry date, or can they be used until they wear out?
Should contractors and visitors be recorded in the same register?
Is this PPE issue register free to download?
Applicable regulatory standards
This template is a starting point. Check the current requirements that apply to your equipment, work and location. The template alone does not establish compliance.
| Standard | Edition | Clauses this template relies on | Source |
|---|---|---|---|
| Model Work Health and Safety RegulationsProvide suitable, well-fitting PPE, maintain or replace it and ensure it is used; workers must use it and report damage. | Model WHS Regulations as at 5 December 2025 (cited within as the Work Health and Safety Regulations 2011) |
| Safe Work Australia (drafted by the Parliamentary Counsel's Committee) |
| Model Work Health and Safety Act (Model Work Health and Safety Bill)Primary duty, including the information, training and instruction workers need to use the equipment. | Model WHS Bill as at 5 December 2025 (includes the Model WHS Legislation Amendment (Incident Notification) 2025) |
| Safe Work Australia (drafted by the Parliamentary Counsel's Committee) |
| Selection, use and maintenance of respiratory protective equipmentSelection, use and maintenance of respiratory protective equipment. | AS/NZS 1715:2009 | Whole instrument | Standards AustraliaSold by the publisher |
| Occupational protective helmetsProduct standard for occupational protective helmets. | AS/NZS 1801:2024 | Whole instrument | Standards AustraliaSold by the publisher |
Model Work Health and Safety Regulations
Edition: Model WHS Regulations as at 5 December 2025 (cited within as the Work Health and Safety Regulations 2011)
Provide suitable, well-fitting PPE, maintain or replace it and ensure it is used; workers must use it and report damage.
- reg 44: Where PPE is used to minimise a risk, the directing PCBU must provide suitable, maintained PPE unless another PCBU has; its use is required so far as reasonably practicable.
- reg 46: Workers must use PPE as instructed so far as reasonably able, not intentionally misuse or damage it, and report damage, defects or cleaning needs.
- Part 3.2 Division 5: Personal protective equipment duties of PCBUs, workers and other persons (regs 44 to 47).
Safe Work Australia (drafted by the Parliamentary Counsel's Committee)
Model Work Health and Safety Act (Model Work Health and Safety Bill)
Edition: Model WHS Bill as at 5 December 2025 (includes the Model WHS Legislation Amendment (Incident Notification) 2025)
Primary duty, including the information, training and instruction workers need to use the equipment.
- s 19: Primary duty of care: a PCBU must ensure, so far as is reasonably practicable, the health and safety of workers and others, including safe plant, systems, training and supervision.
Safe Work Australia (drafted by the Parliamentary Counsel's Committee)
Selection, use and maintenance of respiratory protective equipment
Edition: AS/NZS 1715:2009
Selection, use and maintenance of respiratory protective equipment.
Standards AustraliaSold by the publisher
Occupational protective helmets
Edition: AS/NZS 1801:2024
Product standard for occupational protective helmets.
Standards AustraliaSold by the publisher
Each source was read at its publisher and the page checked on 26 October 2026. The publisher's current text is the authority.
Check the current source
PPE issue register preview

The numbers behind this PPE issue register
The pages below gather the figures behind this kind of check. Each figure on them carries its source and date, so you can quote it in a toolbox talk, a budget case or a board paper without chasing the original report.
Get the free template
Enter your email above to download the full PPE issue register as a PDF.
Embed this free template on your website
Run an industry blog, trade association site, or training resource? Drop a preview of this free PPE issue register straight into your page. The snippet is self-contained, needs no scripts, and links readers back to the full free template.
<div style="max-width:480px;font-family:system-ui,-apple-system,'Segoe UI',Roboto,sans-serif;border:1px solid #E5E7EB;border-radius:12px;padding:20px;background:#ffffff;">
<p style="font-size:12px;font-weight:700;letter-spacing:0.05em;text-transform:uppercase;color:#071D49;margin:0;">Free template</p>
<p style="font-size:18px;font-weight:700;color:#071D49;margin:6px 0 0;">PPE issue register</p>
<ul style="margin:12px 0 0;padding-left:18px;color:#374151;font-size:14px;line-height:1.6;">
<li style="margin:4px 0;">Worker name, employee or contractor number, role, crew or department and start date</li>
<li style="margin:4px 0;">Item issued: type, description, make and model where it matters, and any standard it is certified to</li>
<li style="margin:4px 0;">Size and fit details, including the result and date of any fit test for respiratory protection</li>
<li style="margin:4px 0;">Date issued, quantity, and whether the item is new or a replacement</li>
<li style="margin:4px 0;">Reason for issue: initial issue, replacement due to wear, damage, loss or expiry, or a change of role or task</li>
<li style="margin:4px 0;">Expiry or expected replacement date, particularly for helmets, harnesses, respirators and filters</li>
</ul>
<p style="font-size:13px;color:#6B7280;margin:14px 0 0;padding-top:12px;border-top:1px solid #E5E7EB;">Free <a href="https://www.maptrack.com/templates/ppe-issue-register" style="color:#071D49;font-weight:600;text-decoration:none;">PPE issue register</a> by MapTrack</p>
</div>Free to reuse, including commercially. This template is published under a Creative Commons Attribution 4.0 licence. Copy it, adapt it, put it on your own site or in your own docs. All we ask is that you credit MapTrack with a link back to this page. The snippet above already includes that credit, so if you use it as-is you’re covered.
Cite this template
Writing about this topic? You’re welcome to quote this checklist. Here’s the wording to use so your readers can find the original.
The MapTrack PPE issue register has 6 columns and room for 12 entries.
- Short attribution
- MapTrack PPE issue register, https://www.maptrack.com/templates/ppe-issue-register
- Reference list
- MapTrack. (2026). PPE issue register [Checklist template]. Retrieved from https://www.maptrack.com/templates/ppe-issue-register
Free to reuse with credit under a Creative Commons Attribution 4.0 licence. If you’d rather link straight to it, the page is https://www.maptrack.com/templates/ppe-issue-register.
Need to digitise safety inspections and compliance forms?
Register every asset in MapTrack, attach digital forms, and get a complete history of every inspection, service and compliance record.
Compliance and inspections · All templates · Pricing · Book a demo


