To save as PDF: use your browser's PrintSave as PDF or Print to PDF. This form prints as 2 pages (A4).

Tyre & Rim Inspection Form

Detailed tyre and rim condition assessment

Company logo

PAGE 1 OF 2

Vehicle Details
Inspector Details

Tyre Position Diagram - record tread depth (mm) and pressure (kPa) for each position

FL - Front Left
Tread:
mm
Pressure:
kPa
Brand/size:
← FRONT →
FR - Front Right
Tread:
mm
Pressure:
kPa
Brand/size:
RL - Rear Left
Tread:
mm
Pressure:
kPa
Brand/size:
← REAR →
RR - Rear Right
Tread:
mm
Pressure:
kPa
Brand/size:
Spare
Tread:
mm
Pressure:
kPa
Brand/size:

Tyre Inspection

Mark the applicable column for each item: P = Pass  |  F = Fail  |  N/A = Not applicable. Record notes for any F.

# Check Item P F N/A Notes / Action
Tread & Wear
1FL tread depth above minimum (1.5 mm legal / 3 mm recommended)
2FR tread depth above minimum
3RL tread depth above minimum
4RR tread depth above minimum
5Spare tread depth above minimum
6Wear pattern even across all tyres (no inner/outer/centre wear)
7No cupping, scalloping or feathering
Sidewall Condition
8No cuts, gouges or punctures in sidewalls
9No bulges or deformation
10No cracking, perishing or weather checking
11No exposed cords or structural damage
12DOT date codes checked: no tyres older than 6 years
Tyre & Rim Inspection - Page 2 of 2
Rego
Date
Inspector
# Check Item P F N/A Notes / Action
Inflation
13All tyres inflated to manufacturer's placard specification
14No slow leaks detected (pressure holds)
15Spare tyre inflated to specification
Rim Condition
16FL rim: no cracks, bends or distortion
17FR rim: no cracks, bends or distortion
18RL rim: no cracks, bends or distortion
19RR rim: no cracks, bends or distortion
20No corrosion or kerb damage on rims
21Wheel nuts: all present, torqued to specification
Valves & Balance
22Valve stems: condition acceptable, no cracks or deterioration
23Valve caps: all present
24No valve leaks detected
25Wheel balance: no vibration reported at highway speed
26TPMS operational (if fitted)
27Tyre matching: same size, type and load rating per axle
Overall Result
PASS: tyres & rims serviceable ACTION REQUIRED: see defects FAIL: do not operate

Defects & Action Required  (list any item marked F: reference item # from checklist)

Item # Defect Description Action Taken / Reported to Rectified by / Date

Declaration

I declare that I have completed this tyre and rim inspection of the above vehicle. I have measured tread depths, checked wear patterns, sidewall condition, inflation pressures, rim integrity and valve condition for all tyre positions. I have reported any defects and will not operate the vehicle if any defect affects its safety or roadworthiness until it has been rectified.

Inspector Sign-off
Signature
Print name
Date & time
Supervisor Acknowledgement
Signature
Print name
Date