Minor service - skid steer loader / bobcat (all makes)
Estimated duration: 1 - 2 hours • Frequency: every 250 engine hours
Equipment Details
| # | Service Action | Type | Done | Notes |
|---|---|---|---|---|
| Engine | ||||
| 1 | Drain and replace engine oil (10W-30 or 15W-40) | DRAIN/FILL | ☐ | |
| 2 | Replace engine oil filter | REPLACE | ☐ | |
| 3 | Inspect outer air filter element - replace if dirty | INSPECT | ☐ | |
| 4 | Drain fuel/water separator and check for contamination | DRAIN | ☐ | |
| 5 | Check coolant level and condition - top up if required | CHECK | ☐ | |
| Hydraulic System | ||||
| 6 | Check hydraulic oil level in sight glass - top up if low | CHECK | ☐ | |
| 7 | Inspect hydraulic hoses and fittings for leaks or damage | INSPECT | ☐ | |
| Drive System | ||||
| 8 | Check drive chain/belt tension (if chain drive) | CHECK | ☐ | |
| 9 | Inspect tyres or tracks for wear and damage | INSPECT | ☐ | |
| Lubrication | ||||
| 10 | Grease loader arm pins and pivots (all grease points) | GREASE | ☐ | |
| 11 | Grease auxiliary hydraulic coupler | GREASE | ☐ | |
| Electrical | ||||
| 12 | Check battery terminals, cable condition and charge | CHECK | ☐ | |
| 13 | Test all lights, horn, reversing alarm and beacon | CHECK | ☐ | |
| Safety Devices | ||||
| 14 | Check seatbelt and restraint bar condition and operation | CHECK | ☐ | |
| 15 | Inspect ROPS/FOPS cab structure and mounting bolts | INSPECT | ☐ | |
| Structural | ||||
| 16 | Inspect bucket/attachment and quick-coupler for wear | INSPECT | ☐ | |
| 17 | Check all guards and covers are fitted and secure | CHECK | ☐ | |
Fluid Specifications (General Guide)
| System | Type / Grade | Approx. Capacity |
|---|---|---|
| Engine oil | 10W-30 or 15W-40 | 6 - 10 L |
| Hydraulic oil | ISO VG 46 (AW 46) | 40 - 60 L (system) |
| Coolant | 50/50 ethylene glycol | 8 - 15 L |
| Chaincase / gearbox | Manufacturer-specific | 5 - 10 L |
| Grease | EP2 lithium complex | As required |
Specifications are general guidelines for typical skid steer loaders. Always refer to the manufacturer's service manual for your specific make and model. Capacities vary by machine size.
Parts / Consumables Required
| # | Part / Consumable | Part Number | Qty | Ready |
|---|---|---|---|---|
| 1 | Engine oil (10W-30 or 15W-40) | 6-10 L | ☐ | |
| 2 | Engine oil filter | 1 | ☐ | |
| 3 | Air filter (outer) - if replacing | 1 | ☐ | |
| 4 | Fuel/water separator element | 1 | ☐ | |
| 5 | EP2 grease cartridges | 1-2 | ☐ | |
| 6 | Coolant (pre-mixed or concentrate) | As req. | ☐ | |
| 7 | Rags, drip tray, waste oil container | - | ☐ |
Notes / Defects Identified
Next Service Due
Technician
Supervisor / Workshop Manager