To save as PDF: use your browser's PrintSave as PDF or Print to PDF. This checklist prints as 2 pages (A4).

Rescue Kit Inspection Checklist

Confined space and working-at-heights rescue equipment: inspect before each task and formally every 6 months

Company logo

PAGE 1 OF 2

Kit Details
Inspector Details

Inspection Items

Mark P = Pass  |  F = Fail  |  N/A = Not applicable. Record notes for any item marked F. Any failed item must be replaced before the kit is used.

#CheckPFN/ANotes / Action
Rope & Rigging
1Rescue rope: sheath intact, no cuts, kinks, abrasion or chemical damage
2Rescue rope: length as specified; manufacturer label legible with rated load
3Rescue rope: within service life (check manufacture date / first use date)
4Anchor slings / straps: no cuts, fraying, abrasion or UV degradation
5Anchor slings: stitching intact, no pulled threads; rating label legible
6Anchor device (plate, rigging plate or anchor bolt): no corrosion, cracks or distortion; rating legible
Rescue Devices
7Descender / rescue device: function smooth; load-locking operates correctly
8Descender: no cracks, distortion or excessive wear on friction surfaces; rating legible
9Pulleys: sheave spins freely, side plates intact, axle secure; rating legible
10Tripod / davit arm (if in kit): legs lock securely, no cracks; rated load label legible
Personal Equipment - Karabiners & Standby Harness
11Karabiner 1: gate opens and closes smoothly; locking mechanism operates; no cracks or corrosion
12Karabiner 2: gate opens and closes smoothly; locking mechanism operates; no cracks or corrosion
13All karabiners: rated load marking legible; within service life
14Standby harness: webbing no cuts, fraying, abrasion, chemical or UV damage
15Standby harness: stitching intact, bar tacks secure; D-rings not corroded or distorted
16Standby harness: buckles operate; labels legible; within service life
Rescue Kit Inspection - Page 2 of 2
Kit ID
Date
Inspector
#CheckPFN/ANotes / Action
Emergency Equipment
17Rescue stretcher / litter: no damage to frame or basket; straps in good condition
18First aid kit (in rescue kit): sealed, not expired; contents not depleted
19Communication device: charged / batteries OK; tested and operational
20Gas detector: calibration current; bump-tested; charged / batteries OK; alarm functions tested
21Gas detector: calibration due date recorded and within interval
Storage, Labels & Expiry
22Storage bag / container: clean, dry, no moisture; contents fully inside
23All manufacturer labels: legible on all items (rope, slings, harness, karabiners, devices)
24All items within manufacturer service life: none expired or overdue for inspection
25Kit inventory complete: no items missing from kit contents list

Key Item Expiry / Service Life Record

Overall Result
PASS: kit fit for use ACTION REQUIRED: item(s) to replace FAIL: do not use; kit out of service

Defects & Action Required  (list any item marked F: reference item # from checklist)

Item #Defect descriptionAction taken / replacementDate rectified

Declaration

I declare that I have inspected the above rescue kit in accordance with the applicable Australian WHS requirements and manufacturer guidelines. Any defective, expired or missing items have been recorded above. The rescue kit must not be used for any confined space entry or working-at-heights task until all failed items have been replaced and the kit is confirmed complete and serviceable. Items that have been subjected to a rescue load or used in an emergency have been removed from service and tagged as unserviceable.

Inspector Sign-off
Signature
Print name
Date
Supervisor / EHS Officer Acknowledgement
Signature
Print name
Date