How to save as PDF: Use your browser's Print menu (Ctrl+P / Cmd+P), then select Save as PDF as the destination. This template is sized for A4 paper.

Pallet Racking Inspection Checklist

Periodic racking safety inspection per AS 4084 and EN 15635

Company
logo

PAGE 1 OF 2

Details
# Inspection Item OK/Fail Notes
Uprights
1Uprights plumb and not leaning beyond tolerance
2No dents, bends, or deformation to upright frames
3Upright perforations not torn or elongated
Beams
4Beams level and not deflecting beyond limits
5Beam connectors fully engaged and safety clips fitted
6No dents, cracks, or weld damage on beams
Bracing
7Horizontal and diagonal bracing intact and secure
8No missing or disconnected bracing members
9Bracing bolts tight, no sheared fasteners
Base Plates and Anchors
10Base plates flat on floor, not bent or cracked
11Anchor bolts present, tight, and not corroded
12Floor slab in good condition around base plates
Safety Accessories
13Column guards fitted and undamaged at aisle ends
14Row spacers fitted where specified
15Pallet backstops and mesh panels in place (if required)
16Anti-collapse mesh or netting secure (if fitted)
Load Notices
17Load notice displayed and legible at each aisle end
18Actual loads do not exceed stated safe working load
19Pallet condition acceptable (no broken or non-standard pallets)
Damage Classification
20Green risk items documented (monitor at next inspection)
21Amber risk items documented (action required within 4 weeks)
22Red risk items documented (off-load and isolate immediately)
Declaration & Sign-Off

I confirm that all items have been inspected/completed as indicated above. Any defects or concerns have been noted and reported.

Completed By
Reviewed / Approved By