To save as PDF: use your browser's PrintSave as PDF or Print to PDF. This checklist prints as 2 pages (A4).

NFPA 72 Fire Alarm Inspection Checklist

Fire alarm system inspection per NFPA 72 National Fire Alarm and Signaling Code

Company logo

PAGE 1 OF 2

System Details

Inspection Items

Mark the applicable column: P = Pass | F = Fail | N/A = Not applicable. Record notes for any F.

# Check P F N/A Notes / Action
Control Panel
1Panel in normal operating condition, no trouble or alarm signals
2All zone/circuit LEDs displaying correctly
3Primary (mains) power supply connected and operational
4Secondary (battery) power supply charged and in good condition
Initiating Devices (Smoke / Heat Detectors)
5Detectors free from dust, paint and physical damage
6Detector coverage matches floor plan, no gaps from renovations
7Sample detectors functionally tested (smoke entry / heat response)
8Detector sensitivity within listed range (if addressable)
Manual Pull Stations
9Pull stations accessible, unobstructed and clearly visible
10Pull stations tested and signal received at panel
11Pull station covers and signage in good condition
Notification Appliances (Horns / Strobes)
12Audible devices produce sound at required dB level
13Visual strobes flash and are visible in all required areas
14Notification appliances free from damage and properly mounted
NFPA 72 Fire Alarm Inspection - Page 2 of 2
Building
Date
Inspector
# Check P F N/A Notes / Action
Annunciator
15Remote annunciator displays match control panel status
16Annunciator LEDs and labels legible and correct
Wiring and Conduit
17Wiring connections secure at panel and junction boxes
18Conduit and cable pathways free from damage and properly supported
19Ground fault indication clear, no faults present
20Circuit supervision (Class A or B) verified per design
Emergency Communication
21Emergency voice/alarm communication system tested (if installed)
22Two-way communication (fire phone) operational at all stations
23Central station monitoring signal transmission tested and confirmed
Inspection Result
PASS: system compliant, all devices operational FAIL: deficiency(s) found, corrective action required

Declaration

I certify that I have inspected the fire alarm system identified above in accordance with NFPA 72 requirements. Any deficiencies have been documented and reported to the building owner/manager. The system shall not be returned to service until all critical deficiencies are corrected.

Inspector Sign-off
Signature
Print name & licence #
Date
Building Owner / Manager Acknowledgement
Signature
Print name
Date