Monthly inspection for dewatering, trash and transfer pumps
Estimated duration: 30 - 60 minutes • Frequency: monthly or every 50 operating hours
Equipment and Inspection Details
| # | Inspection Item | Method | P / F | Notes / Measurements |
|---|---|---|---|---|
| 1. Engine and Fuel System | ||||
| 1 | Engine oil level and condition | CHECK | ||
| 2 | Coolant level | CHECK | ||
| 3 | Air filter condition | INSPECT | ||
| 4 | Fuel level and fuel line condition | INSPECT | ||
| 5 | Belts (cracking, tension) | INSPECT | ||
| 6 | Exhaust system and mounting bolts | INSPECT | ||
| 2. Priming System | ||||
| 7 | Priming pump operation | TEST | ||
| 8 | Vacuum seal integrity | INSPECT | ||
| 9 | Priming valve condition | INSPECT | ||
| 3. Suction and Discharge | ||||
| 10 | Suction hose condition (no cracks, kinks) | INSPECT | ||
| 11 | Discharge hose condition | INSPECT | ||
| 12 | Cam-lock couplings (wear, seals) | INSPECT | ||
| 13 | Strainer/foot valve condition | INSPECT | ||
| 14 | Clamps secure | CHECK | ||
| 4. Seals and Mechanical | ||||
| 15 | Mechanical seal (leaks, wear) | INSPECT | ||
| 16 | Packing gland (if fitted) | INSPECT | ||
| 17 | Shaft sleeve condition | INSPECT | ||
| 18 | Impeller condition (visual) | INSPECT | ||
| 5. Guards and Safety | ||||
| 19 | Belt guards in place and secure | CHECK | ||
| 20 | Coupling guards | CHECK | ||
| 21 | Hot surface guards | CHECK | ||
| 22 | Emergency stop operational | TEST | ||
| 6. Operational Test | ||||
| 23 | Start and run test | TEST | ||
| 24 | Pressure reading within spec | MEASURE | ||
| 25 | Abnormal noise or vibration | TEST | ||
Defects, Actions Required and Comments
Inspector
Site Supervisor