To save as PDF: use your browser's Print → Save as PDF or Print to PDF. This checklist prints as 2 pages (A4).
Thorough examination per LOLER 1998, Regulation 9.
PAGE 1 OF 2
Inspection Items
Mark the applicable column for each item: P = Pass | F = Fail | N/A = Not applicable. Record notes for any F.
| # | Check | P | F | N/A | Notes / Action |
|---|---|---|---|---|---|
| Hoist Structure & Mounting | |||||
| 1 | Hoist casing free from cracks, dents and visible damage | ||||
| 2 | Mounting bolts secure and free from corrosion | ||||
| 3 | Trolley wheels in good condition, running freely on track | ||||
| 4 | Support beam and end stops secure, no visible deflection | ||||
| 5 | SWL plate legible and securely attached | ||||
| Chain / Wire Rope | |||||
| 6 | Chain links free from wear, elongation and distortion | ||||
| 7 | Chain link diameter within manufacturer discard limits | ||||
| 8 | Wire rope free from broken wires, kinks and birdcaging | ||||
| 9 | Rope terminations and ferrules secure with no slippage | ||||
| 10 | Chain or rope adequately lubricated and free from corrosion | ||||
| Hook & Attachment Points | |||||
| 11 | Hook throat opening within manufacturer tolerance | ||||
| 12 | Safety catch present and closing fully under spring pressure | ||||
| 13 | No signs of hook straightening, twisting or wear | ||||
| 14 | Shackles and swivels free from cracks and excessive wear | ||||
| 15 | Bottom block and sheaves in good condition, rotating freely | ||||
| Braking System | |||||
| 16 | Brake holds load securely when control is released | ||||
| 17 | No drift or creep observed during holding test | ||||
| 18 | Brake pads or discs have adequate remaining material | ||||
| # | Check | P | F | N/A | Notes / Action |
|---|---|---|---|---|---|
| Electrical & Controls | |||||
| 19 | Pendant control in good condition, buttons clearly marked | ||||
| 20 | Emergency stop functions correctly and resets properly | ||||
| 21 | Upper limit switch stops hoist travel before mechanical contact | ||||
| 22 | Lower limit switch stops hoist travel at correct position | ||||
| 23 | Overload protection device tested and functioning | ||||
| 24 | Power cable and connections free from damage and strain | ||||
| Operational Test | |||||
| 25 | Hoist raises and lowers smoothly at all speeds | ||||
| 26 | Trolley traverses smoothly along full track length | ||||
| 27 | No abnormal noise, vibration or overheating during operation | ||||
| 28 | Chain or rope spools correctly onto drum without overlap | ||||
| Documentation & Marking | |||||
| 29 | Previous examination report available and reviewed | ||||
| 30 | Outstanding defects from previous examination have been rectified | ||||
| 31 | Load test certificate current and available | ||||
| 32 | Colour-coded inspection tag or sticker applied and current | ||||
Defects & Corrective Actions (list any item marked F, reference item # from checklist)
| Item # | Defect description | Corrective action / reported to | Rectified by / date |
|---|---|---|---|
Declaration
I declare that I have carried out a thorough examination of the above lifting equipment in accordance with LOLER 1998, Regulation 9. I have recorded all defects observed and, where a defect presents an existing or imminent danger, I have notified the duty holder immediately and will report the matter to the relevant enforcing authority as required by Regulation 10.