To save as PDF: use your browser's Print → Save as PDF or Print to PDF. This checklist prints as 2 pages (A4).
Wheel loader daily inspection: complete before first use each shift
PAGE 1 OF 2
Inspection Items
Circle or mark the applicable column for each item: P = Pass | F = Fail | N/A = Not applicable. Record notes for any F.
| # | Check | P | F | N/A | Notes / Action |
|---|---|---|---|---|---|
| Walk-Around | |||||
| 1 | General condition: clean, no visible damage | ||||
| 2 | No visible leaks: oil, coolant, fuel, hydraulic | ||||
| 3 | Ground conditions: stable, suitable for operation | ||||
| Cab & ROPS / FOPS | |||||
| 4 | ROPS / FOPS: structural integrity, no damage or modifications | ||||
| 5 | Seatbelt: working, not frayed or damaged | ||||
| 6 | Mirrors: clean, correctly adjusted (both sides) | ||||
| 7 | Windows / screens: clean, no cracks, secure | ||||
| 8 | Wipers and washers: operational | ||||
| Bucket | |||||
| 9 | Bucket cutting edge: condition acceptable, no excessive wear | ||||
| 10 | Bucket teeth: all present, secure, acceptable wear | ||||
| 11 | Bucket pins: secure, retainers in place | ||||
| 12 | Quick-coupler: locked, safety latches engaged (if fitted) | ||||
| Hydraulic System | |||||
| 13 | Hydraulic cylinders: no leaks, no scoring | ||||
| 14 | Hoses: secure, no leaks, no chafing or bulging | ||||
| 15 | Hydraulic couplings: tight, no weeping | ||||
| Tyres & Wheels | |||||
| 16 | Tyre pressure: all tyres within specified range | ||||
| 17 | Tyre condition: no cuts, bulges or excessive wear | ||||
| 18 | Wheel nuts: secure, none missing | ||||
| # | Check | P | F | N/A | Notes / Action |
|---|---|---|---|---|---|
| Brakes & Steering | |||||
| 19 | Service brake: adequate stopping power | ||||
| 20 | Park brake: engages and holds on grade | ||||
| 21 | Steering: acceptable free play, responsive | ||||
| 22 | Articulation lock pin: stowed, not engaged during operation | ||||
| Engine & Fluids | |||||
| 23 | Engine oil: correct level | ||||
| 24 | Coolant: correct level, no leaks | ||||
| 25 | Hydraulic oil: correct level | ||||
| 26 | Fuel: sufficient for shift | ||||
| 27 | Air filter indicator: in acceptable range | ||||
| Reversing Camera / Alarm | |||||
| 28 | Reversing camera: operational, image clear (if fitted) | ||||
| 29 | Reversing alarm: audible, operational | ||||
| Safety Devices | |||||
| 30 | Fire extinguisher: present, in date, accessible | ||||
| 31 | Horn: audible | ||||
| 32 | Emergency stops: tested, accessible | ||||
| 33 | Gauges and warning lights: functioning correctly | ||||
| Lights & Electrics | |||||
| 34 | Headlights and work lights: operational | ||||
| 35 | Beacon: operational | ||||
| 36 | Indicators: operational | ||||
| 37 | Battery: terminals secure, no corrosion | ||||
Defects & Action Required (list any item marked F: reference item # from checklist)
| Item # | Defect description | Action taken / reported to | Rectified by / date |
|---|---|---|---|
Declaration
I declare that I have completed this loader pre-start inspection before using this machine. I have reported any defects or non-compliant items to my supervisor and will not use this loader until any defects that affect safety have been rectified. I understand that failure to complete a pre-start check or to report defects may breach company policy and WHS obligations.