Service life tracking and condemnation register per AS 1891.4:2025
Estimated duration: ~15-20 minutes per item • Assessment of service life and physical condition
Assessment Details
Equipment Service Life Register
| Item | Equipment Type | Manufacturer | Model | Serial No. | Date of Manufacture | Date First in Service | Calculated Retirement Date | Current Condition | Decision |
|---|---|---|---|---|---|---|---|---|---|
| 1 | |||||||||
| 2 | |||||||||
| 3 | |||||||||
| 4 | |||||||||
| 5 | |||||||||
| 6 | |||||||||
| 7 | |||||||||
| 8 | |||||||||
| 9 | |||||||||
| 10 | |||||||||
| 11 | |||||||||
| 12 |
| # | Inspection Item | Method | P / F / NA | Notes |
|---|---|---|---|---|
| 1. Textile Component Assessment | ||||
| 1 | Webbing - cuts, fraying, abrasion, chemical damage | INSPECT | ||
| 2 | Stitching - pulled, cut, or missing stitches | INSPECT | ||
| 3 | Labels - manufacture date legible, standard markings present | VERIFY | ||
| 4 | Energy absorber - deployment indicator not triggered | INSPECT | ||
| 5 | Hardware attachment points - webbing wear at D-rings | INSPECT | ||
| 2. Hardware Component Assessment | ||||
| 6 | Buckles and adjusters - function freely, no distortion | TEST | ||
| 7 | D-rings - no cracks, distortion, or sharp edges | INSPECT | ||
| 8 | Snap hooks - gate closure, locking mechanism, nose gap | TEST | ||
| 9 | Karabiners - gate function, wear on pivot | TEST | ||
| 10 | Thimbles and ferrules - no slippage, swaging intact | INSPECT | ||
| 3. Service Life Determination | ||||
| 11 | Date of manufacture confirmed from label | VERIFY | ||
| 12 | Age calculated (years/months from manufacture) | MEASURE | ||
| 13 | Exposure history (UV, chemicals, heat events) documented | REVIEW | ||
| 14 | Previous inspection records reviewed | REVIEW | ||
| 15 | Retirement decision justified and recorded | VERIFY | ||
Condemned Equipment Disposal Record
Height Safety Inspector
Site Safety Manager