To save as PDF: use your browser's PrintSave as PDF or Print to PDF. This checklist prints as 2 pages (A4).

Fire Extinguisher Inspection Checklist

Monthly visual inspection: complete per AS 1851 / site safety requirements

Company logo

PAGE 1 OF 2

Extinguisher & Inspection Details

Inspection Items

Circle or mark the applicable column for each item: P = Pass  |  F = Fail  |  N/A = Not applicable. Record notes for any F.

# Check P F N/A Notes / Action
Location & Accessibility
1Location: extinguisher is in its designated location
2Access: unobstructed; can be reached quickly in an emergency
3Mounting height: handle approx. 1.0 m from floor; bracket secure
4Signage: location sign visible and legible
Physical Condition
5Cylinder body: no visible damage, dents, corrosion, bulging or leaks
6Label / data plate: legible and securely attached; agent type and use instructions visible
7Safety pin: in place and intact; pull-ring / pin not bent or missing
8Tamper seal / tamper indicator: intact, not broken or missing
9Handle / carry handle: no cracks, bends or damage
10Trigger / valve: no damage; actuating lever moves freely (do not discharge)
Hose, Horn & Nozzle
11Hose: no cracks, blockage, fraying or damage (if fitted)
12Horn / nozzle: no blockage, damage or cracking; pointing forward
Fire Extinguisher Inspection Checklist - Page 2 of 2
Extinguisher ID
Date
Inspector
# Check P F N/A Notes / Action
Pressure & Charge
13Pressure gauge (if fitted): needle in green / charged zone; not in red
14Agent weight / level: within spec; no evidence of partial discharge (weigh if required)
Service & Compliance
15Service tag: present and legible
16Last 6-monthly service: within required interval (AS 1851 Maintenance)
17Hydrostatic / pressure test date: within required pressure vessel test interval
18Annual / periodic inspection certificate: attached and current (if applicable)
Overall Result
PASS: all items satisfactory, extinguisher fit for service ACTION REQUIRED: item(s) to rectify, see below FAIL: remove from service, report immediately

Defects & Action Required  (list any item marked F: reference item # from checklist)

Item # Defect description Action taken / reported to Rectified by / date

Declaration

I declare that I have completed this fire extinguisher inspection. I have reported any defects or non-compliant items and have removed the extinguisher from service where required. Any extinguisher found to be defective, discharged or out of service date has been reported to the responsible person and will not be returned to service until it is repaired, recharged or replaced by a licensed technician.

Inspector Sign-off
Signature
Print name
Date & time
Supervisor / Safety Officer Acknowledgement
Signature
Print name
Date