Inspection checklist for commercial and industrial exhaust fans covering motor belts guards and airflow
PAGE 1 OF 2
| # | Inspection Item | OK | Defect | Action Required | Notes |
|---|---|---|---|---|---|
| Motor | |||||
| 1 | Motor temperature within limits | ||||
| 2 | Vibration within limits | ||||
| 3 | Unusual noise | ||||
| 4 | Mounting bolts secure | ||||
| 5 | Motor nameplate legible | ||||
| Bearings and Drive | |||||
| 6 | Bearing noise and play | ||||
| 7 | Bearing lubrication | ||||
| 8 | Belt condition (no cracks or glazing) | ||||
| 9 | Belt tension correct | ||||
| 10 | Pulley alignment | ||||
| Guards and Housing | |||||
| 11 | All guards in place and secure | ||||
| 12 | Fan blades undamaged | ||||
| 13 | Fan housing clean and undamaged | ||||
| 14 | No excessive buildup on blades | ||||
| 15 | Housing fasteners secure | ||||
| Ductwork and Connections | |||||
| 16 | Flexible connections intact | ||||
| 17 | Rigid ductwork joints sealed | ||||
| 18 | No visible corrosion or damage | ||||
| 19 | Access panels secure | ||||
| Airflow and Electrical | |||||
| 20 | Airflow at grille (L/s) | ||||
| 21 | Airflow meets design specification | ||||
| 22 | Isolator labelled and operational | ||||
| 23 | Terminal connections tight | ||||
| 24 | Earth continuity confirmed | ||||
I confirm that all items have been inspected/completed as indicated above. Any defects or concerns have been noted and reported.