Elevator Annual Service Procedure

Annual service - traction and hydraulic elevator / lift (per AS 1735)

Your logo here
PAGE 1 OF 3
ANNUAL SERVICE

Estimated duration: 4 - 8 hours • Frequency: every 12 months

▲ Includes all quarterly service items.

Equipment Details

# Service Action (Annual - Additional Items) Type Done Notes
Traction System (Traction Lifts)
1Inspect wire ropes - measure diameter and count broken wires per layMEASURE
2Inspect sheave grooves - check for wear and cracksINSPECT
3Inspect machine brake - reline if neededINSPECT
4Check gearbox oil - change if requiredCHECK
Hydraulic System (Hydraulic Lifts)
5Check cylinder for driftCHECK
6Check oil level and conditionCHECK
7Inspect control valves and hosesINSPECT
Door Operator Service
8Service door operator (motor, belt/chain, rollers, clutch, speed adjustment)SERVICE
Electrical Tests
9Insulation resistance test on motorTEST
10Earth continuity testTEST
Load and Speed Tests
11Load test (rated capacity)TEST
12Overload test (110% rated capacity)TEST
13Speed test (up and down, compare to rated speed)TEST
Safety Gear and Governor
14Safety gear test (overspeed governor trip)TEST
15Governor test and resetTEST
Compensation and Clearances
16Inspect compensation (ropes/chain/tape)INSPECT
17Check car and counterweight clearances (pit and overhead)CHECK
Compliance
18Compliance inspection per AS 1735 (Lifts, Escalators and Moving Walks)INSPECT
19Update compliance certificateLOG

Parts / Consumables Required (Annual - Additional)

#Part / ConsumablePart NumberQtyReady
1All quarterly consumables (see quarterly list)-
2Brake linings (if relining)As req.
3Door operator belt1
4Wire ropes (if replacing)As req.
5Gearbox oilAs req.
6Compliance test equipment-

Notes / Defects Identified

Next Service Due

Technician

Building / Facilities Manager