To save as PDF: use your browser's Print → Save as PDF or Print to PDF. This checklist prints as 2 pages (A4).
Drill rig daily inspection: complete before first use each shift
PAGE 1 OF 2
Inspection Items
Circle or mark the applicable column for each item: P = Pass | F = Fail | N/A = Not applicable. Record notes for any F.
| # | Check | P | F | N/A | Notes / Action |
|---|---|---|---|---|---|
| Walk-Around | |||||
| 1 | General condition: no visible damage or deterioration | ||||
| 2 | No visible leaks: oil, coolant, fuel, hydraulic | ||||
| 3 | Ground conditions: stable, level, suitable for drilling | ||||
| Engine & Fluids | |||||
| 4 | Engine oil: correct level | ||||
| 5 | Coolant: correct level, no leaks | ||||
| 6 | Hydraulic oil: correct level | ||||
| 7 | Fuel: sufficient for shift | ||||
| 8 | Air filter indicator: in acceptable range | ||||
| 9 | DEF / AdBlue: level adequate (if fitted) | ||||
| Tracks & Undercarriage | |||||
| 10 | Track tension: correct, even both sides | ||||
| 11 | Sprockets: no excessive wear or damage | ||||
| 12 | Rollers and idlers: rotate freely, no leaks | ||||
| 13 | Track pads: condition acceptable, no missing | ||||
| 14 | No debris wrapped around tracks or undercarriage | ||||
| Mast & Drill Head | |||||
| 15 | Mast pins and bolts: secure, no play or cracking | ||||
| 16 | Drill head: condition acceptable, no excessive wear | ||||
| 17 | Winch and wire ropes: no fraying, kinks or damage | ||||
| 18 | Kelly bar / drill rods: condition acceptable, connections secure | ||||
| 19 | Centraliser / guide: secure, not worn | ||||
| # | Check | P | F | N/A | Notes / Action |
|---|---|---|---|---|---|
| Hydraulics | |||||
| 20 | Rams and cylinders: no leaks or scoring | ||||
| 21 | Hoses: secure, no chafing, bulging or leaks | ||||
| 22 | Connections and couplings: tight, no weeping | ||||
| 23 | Hydraulic gauges: reading within normal range | ||||
| Cab & Controls | |||||
| 24 | Cabin access and housekeeping: clean, clear of debris | ||||
| 25 | Seatbelt: working, not frayed or damaged | ||||
| 26 | Mirrors / camera: clean, correctly adjusted | ||||
| 27 | Wipers and washers: operational | ||||
| 28 | Gauges and displays: functioning correctly | ||||
| Safety Devices | |||||
| 29 | Fire extinguisher: present, in date, accessible | ||||
| 30 | First aid kit: present and stocked | ||||
| 31 | Emergency stops: tested, accessible | ||||
| 32 | Guards and handrails: secure, not damaged | ||||
| 33 | Beacon / strobe: operational | ||||
| Lights & Electrics | |||||
| 34 | Headlights and work lights: operational | ||||
| 35 | Indicators: operational | ||||
| 36 | Battery terminals: secure, no corrosion | ||||
Defects & Action Required (list any item marked F: reference item # from checklist)
| Item # | Defect description | Action taken / reported to | Rectified by / date |
|---|---|---|---|
Declaration
I declare that I have completed this drill rig pre-start inspection before using this drill rig. I have reported any defects or non-compliant items to my supervisor and will not use this drill rig until any defects that affect safety have been rectified. I understand that failure to complete a pre-start check or to report defects may breach company policy and WHS obligations.