To save as PDF: use your browser's Print → Save as PDF or Print to PDF. This checklist prints as 2 pages (A4).
Daily pre-start safety inspection for chainsaws
PAGE 1 OF 2
Pre-Start Inspection Items
Mark the applicable column for each item: OK = Satisfactory | Fail = Not met | N/A = Not applicable. Record notes for any Fail.
| # | Inspection Item | OK | Fail | N/A | Notes / Action |
|---|---|---|---|---|---|
| Chain and Bar | |||||
| 1 | Chain correctly tensioned (slight sag, snaps back to bar) | ||||
| 2 | Chain teeth sharp and evenly filed | ||||
| 3 | Guide bar straight, no burrs on rails | ||||
| 4 | Bar nose sprocket rotates freely and lubricated | ||||
| Chain Brake | |||||
| 5 | Chain brake engages when front hand guard pushed forward | ||||
| 6 | Chain stops immediately when brake is applied | ||||
| 7 | Chain brake band not worn beyond service limit | ||||
| Throttle and Controls | |||||
| 8 | Throttle trigger returns to idle when released | ||||
| 9 | Throttle interlock (trigger lockout) functions correctly | ||||
| 10 | On/off switch operational | ||||
| Spark Arrestor | |||||
| 11 | Spark arrestor screen fitted and clean | ||||
| 12 | Muffler secure with no exhaust leaks | ||||
| Anti-Vibration Mounts | |||||
| 13 | Anti-vibration mounts intact, no excessive play | ||||
| 14 | Handles and grips secure and undamaged | ||||
| # | Inspection Item | OK | Fail | N/A | Notes / Action |
|---|---|---|---|---|---|
| Fuel and Oil System | |||||
| 15 | Fuel tank cap seals properly, no leaks | ||||
| 16 | Fuel mix correct ratio per manufacturer | ||||
| 17 | Chain oil reservoir filled | ||||
| 18 | Automatic oiler delivering oil to bar (check at idle) | ||||
| PPE Check | |||||
| 19 | Chainsaw chaps or trousers (cut-protection) worn | ||||
| 20 | Safety helmet with face screen and hearing protection | ||||
| 21 | Cut-resistant gloves worn | ||||
| 22 | Steel-cap boots with cut-protection worn | ||||
Declaration
I confirm that all pre-start inspection items have been checked as indicated above. Any faults or defects have been recorded and reported. This chainsaw is / is not (circle one) safe for use. Do not operate if the chain brake, throttle interlock or spark arrestor has failed.